User manual ZANKER KHT6111X

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ZANKER KHT6111X. We hope that this ZANKER KHT6111X user guide will be useful to you.


ZANKER KHT6111X : Download the complete user guide (117 Ko)

Manual abstract: user guide ZANKER KHT6111X

Detailed instructions for use are in the User's Guide.

[. . . ] For safety reasons, minimum ventilation must be as shown in the relevant Figure. Before any cleaning or maintenance work is carried out, be sure to switch off and unplug the appliance. If the appliance is transported horizontally, it is possible that the oil contained in the compressor flows in the refrigerant circuit. It is advisable to wait at least two hours before connecting the appliance to allow the oil to flow back in the compressor. [. . . ] Do not use other electrical appliances (such as ice cream makers) inside of refrigerating appliances, unless they are approved for this purpose by the manufacturer. 40 INSTALLATION If this appliance featuring magnetic door seals is to replace an older appliance having a spring lock (latch) on the door or lid, be sure to make that spring lock unusable before you discard the old appliance. This will prevent it from becoming a death-trap for a child. Electrical connection Before plugging in, ensure that the voltage and frequency shown on the serial number plate correspond to your domestic power supply. For operation with different voltages, a suitably sized auto-transformer must be used. The power supply cable plug is provided with a contact for this purpose. If the domestic power supply socket is not earthed, connect the appliance to a separate earth in compliance with current regulations, consulting a specialist technician. The Manufacturer declines all responsibility if the above safety precautions are not observed. This appliance complies with EEC directive number 87/308 of 2/6/87 relative to radio interference suppression. Directives: - 73/23 EEC of 19. 2. 73 (Low Voltage Directive) and subsequent modifications; - 89/336 EEC of 3. 5. 89 (Electromagnetic Compatibility Directive) and subsequent modifications. Positioning The appliance should be installed well away from sources of heat such as radiators, boilers, direct sunlight etc. Best performance is obtained with ambient temperature between +18°C and +43°C (class T); +18°C and +38°C (class ST); +16°C and +32°C (class N); +10°C and +32°C (class SN). For building into kitchen units follow the special "Building-in" instructions given. Cleaning the interior Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brand-new product, then dry thoroughly. Do not use detergents or abrasive powders, as these will damage the finish. 41 Door reversibility (Fig. However, the exact setting should be chosen keeping in mind that the temperature inside the refrigerator depends on: room temperature; how often the door is opened; the quantity of food stored; location of appliance. To stop operation, simply turn the thermostat knob to position «O». 45 Freezing fresh food The 4-star freezer ( ) is suitable for long term storage of commercially frozen food and for freezing fresh food. To fast freeze food, if the appliance has been out of operation, allow it to run on the fast freeze setting for at least three hours before loading the food. If, however, the appliance is already in operation, set it to run on the fast freeze setting for at least 24 hours before loading the food. Place the food to be frozen in the upper compartment of the freezer as this is the coldest part. To help you make the most of the freezing process, here are some important hints: the maximum quantity of food which can be frozen in 24 hrs. Bananas, potatoes, onions and garlic, if not packed, must not be kept in the refrigerator. Temperature regulation The temperature is automatically regulated and can be increased to achieve a higher temperature (warmer) by rotating the thermostat knob toward lower settings or reduced (colder) rotating the knob towards higher settings. However, the exact setting should be chosen keeping in mind that the temperature inside the refrigerator depends on: room temperature; how often the door is opened; the quantity of food stored; location of appliance. To stop operation, simply turn the thermostat knob to position «O». Important Inner arrangement Movable glass shelves The walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired. For better use of space, the front half-shelves can lie over the rear ones (Fig. [. . . ] These trays should be filled with drinking water and then placed in the freezer compartment. D037 Freezer The freezer compartment, however, will become progressively covered with frost. This should be removed with the special plastic scraper provided, whenever the thickness of the frost exceeds 4 mm. During this operation it is not necessary to switch off the power supply or to remove the foodstuffs. Never use sharp metal tools to scrape off frost from the evaporator as you could damage it. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ZANKER KHT6111X




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ZANKER KHT6111X will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.