User manual ZANKER GS200
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ZANKER GS200. We hope that this ZANKER GS200 user guide will be useful to you.
Manual abstract: user guide ZANKER GS200
Detailed instructions for use are in the User's Guide.
[. . . ] . page 29 Prolonged periods of non-operation, frost precautions, moving the machine . . page 31
TECHNICAL SPECIFICATIONS
DIMENSIONS Width Height Max depth Max depth with door open Voltage 46. 6 cm 81. 8 ÷ 87. 8 cm 55. 5 cm 111. 4 cm 220 - 230 V/50Hz 200 W 2800 W 3000 W minimum maximum 0. 5 bar 8 bar 8 Water Electricity 17 lt 1. 1 kW/h
ELECTRICAL CONNECTION MOTOR RATING DURING WASHING POWER OF HEATING ELEMENT OVERALL POWER WATER SUPPLY PRESSURE
CAPACITY (STANDARD IEC PLACE SETTINGS) CONSUMPTION:
This appliance complies with the following E. E. C. Directives: - 73/23 of 19. 2. 73 (Low Voltage Directive) and subsequent modifications; - 89/336 of 3. 5. 89 (Electromagnetic Compatibility Directive) and subsequent modifications.
PID37GB
18
WARNINGS
It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings. [. . . ] ** If you use phosphate free detergents containing enzymes, use salt starting from 4°dH (7°TH).
Level 1 If your water is «level 1» it is already soft and therefore there is no need to use salt. Levels 3 and 5 (water softener adjustment) If your water is level 3 or 5, proceed as follows: slide out the lower basket and unscrew the cap of the salt container; turn the two-position selector anticlockwise from position - to position + with the aid of a knife or a screwdriver.
SR09
Fill the container with 1 litre of water (this operation is necessary only the first time). Place approximately 1 kg of dishwasher salt inside using the funnel provided (see figure).
Replace the cap making sure that there is no trace of salt on the screw thread or on the gasket. If you have inadvertently spilled salt select a wash programme immediately after. All that is then required is to periodically top up the container with salt. You are reminded of this by a green refill indicator on the cap of the salt container. When the green indicator disappears, the water softener needs refilling with salt. The salt container always has some water inside which will normally overflow when refilling with salt. Caution Only fill with salt just before starting one of the complete washing programmes (not Rinse and Hold programme). This will prevent any grains of salt or salty water, which may have been spilled, remaining on the bottom of the machine for any period of time. This could cause corrosion.
AA01
PAA23GB
22
Rinse aid
The use of this liquid ensures thorough rinsing, spot and streak free drying, making the water run quickly off the dishes for sparkling results. You will improve drying results by leaving the dishwasher door ajar for at least 15-30 minutes as soon as the programme finishes. If you find that drying results are acceptable even without rinse aid, there is no need to use this product. Dishwasher performance will not be affected.
Aluminium tends to go black; copper, pewter and brass tend to stain.
Caution: You are advised not to load very small items which can fall through the baskets. Note: When buying new dishes, ensure that they are dishwasher-proof.
PCL27GB
26
Washing programmes
Recommended quantity of detergent in the dispenser on the door on the dispenser lid Approximate consumption values
***
Programmes Cycle description
Type of load
Degree of soil
Starting position of the programmer Required pushbuttons
Programme Energy Water duration consumption consumption in minutes in kWh in litres
programme 65°
* Normal
(with prewash)
Normally or heavily soiled, also dried up and/or containing starch (i. e. pasta, rice, semolina, potatoes, egg, sauces, roast).
A
23 g 5g
Normal programme 65°
Pots - Pans Crockery
Cold prewash Main wash up to 65°C 1 cold rinse 1 hot rinse up to 65°C Hot air drying
64
1, 1
17
(without prewash)
Lightly soiled, even dried up and containing starch (i. e. pasta, rice, semolina, potatoes, egg, sauces, roast).
B
23 g
/
Main wash up to 65°C 1 cold rinse 1 hot rinse up to 65°C Hot air drying
58
1, 1
14
* Bio programme 50°
(with prewash)
Normally or heavily soiled, also dried up and/or containing starch (i. e. pasta, rice, semolina, potatoes, egg, sauces, roast).
A
BIO
23 g 5g
Cold prewash Main wash up to 50°C 1 cold rinse 1 hot rinse up to 65°C Hot air drying
64
1, 0
17
PTP40GB
27
Bio programme 50°
(without prewash)
Pots - Pans Crockery Lightly soiled, even dried up and containing starch (i. e. pasta, rice, semolina, potatoes, egg, sauces, roast).
B
BIO
23 g
/
Main wash up to 50°C 1 cold rinse 1 hot rinse up to 65°C Hot air drying
58
1, 0
14
** Quick
programme 50°
Crockery, party crockery
Lightly soiled, not dried up (i. e. meat, cooked or uncooked v egetables, milk coffee, drinks).
C
BIO
23 g
/
Main wash up to 50°C 1 cold rinse 1 hot rinse up to 55°C
36
0, 8
16
Rinse & Hold
Partial load to be completed later. This programme does not require any detergent.
D
/
/
1 cold rinse (to avoid food scraps from sticking to the crockery).
10
0, 1
11
* Testing programmes according to IEC 436/DIN 44990
** This is a special programme for quick washing (approx. 36 minutes) a full load of lightly soiled dishes,
- Normal programme with detergent type A and Bio programme with detergent type B; - Recommended setting of rinse aid: 3. - Standard place settings: 8
glasses and crockery (except pots) so that you may re-use them promptly. [. . . ] Please make sure you give the model and serial number of the appliance. This information can be found on the rating plate located on the right-hand side of the dishwasher door (see picture). Original spare parts can be purchased from Service Centres.
The machine will not drain
s s s s
The drain hose is kinked. There is no air vent in the end of the drain hose.
The dishes are not clean (poor wash)
s s s s s s s s s s s
Prod. No. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ZANKER GS200
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ZANKER GS200 will begin.