User manual YAMAHA YM-460 YM-460F YM-410D YM-410 YM-410F YM-46 YM-41 YM-2400 YM-2400R
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual YAMAHA YM-460 YM-460F YM-410D YM-410 YM-410F YM-46 YM-41 YM-2400 YM-2400R. We hope that this YAMAHA YM-460 YM-460F YM-410D YM-410 YM-410F YM-46 YM-41 YM-2400 YM-2400R user guide will be useful to you.
You may also download the following manuals related to this product:
YAMAHA YM-460 YM-460F YM-410D YM-410 YM-410F YM-46 YM-41 YM-2400 YM-2400R (1983 ko)
YAMAHA YM-460 YM-460F YM-410D YM-410 YM-410F YM-46 YM-41 YM-2400 YM-2400R (2213 ko)
YAMAHA YM-460 YM-460F YM-410D YM-410 YM-410F YM-46 YM-41 YM-2400 YM-2400R (1750 ko)
Manual abstract: user guide YAMAHA YM-460 YM-460F YM-410D YM-410 YM-410F YM-46 YM-41 YM-2400 YM-2400R
Detailed instructions for use are in the User's Guide.
[. . . ] The instrument may become impossible to stop, crash into a wall, and cause serious injury. If the instrument must be lifted, do so with at least two (2) persons. Holding the rail section can result in the instrument dropping or falling off. * Approximate weights for concert marimbas are given in the following chart. [. . . ] Locking screws fit into channels on leg pipes to eliminate slippage ad looseness. The YM-460/460F/2400/2400R offers a 5-step height adjustment that goes from 89cm at its lowest position, to 97cm at its highest. Since the YM410/410F is adjustable in 7-steps, from 76cm to 88cm, it promotes proper playing posture from children to adults.
5. Large Casters
Large 100mm-diameter casters offer smoother transport. (YM-46 and 41 utilize 75mm-diameter casters).
2. Fine Tuning
Tone bars are tuned by the highly refined ears and skills of our technicians and precision strobe tuners in an environmentally controlled room in which both temperature and humidity are kept constant. Precise tuning of the harmonic overtones, which determine timbre, results in stable pitch and tone without any unevenness.
6. 3-Step Height Adjustment for Resonator Pipes
Resonator height can be adjusted in 3-steps to avoid loss of ideal resonance due to temperature changes. (The YM-41 only provides 2-step adjustment. )
3. Easy Assembly/Disassembly
The instrument is designed to offer easy assembly and disassembly to provide convenient storing and transport. The YM-460/460F/410D/46/2400/2400R utilize folding designs with two-section frames and pipes to provide the utmost in compact convenience.
24
02_ym460_en. indd 24
14/10/10 9:43
NOMENCLATURE
■ YM-460/460F/410/410F/46/41/2400/2400R
* The illustration shows model YM-460. Accidental tone bars
Rail
Natural tone bars Suspension cord Frame end
Leg (Small end)
Slant shaft
Slide leg
Resonators (Accidental tone side)
Resonators (Natural tone side)
Caster (with brake) Reinforcement stay (Small end) Reinforcement stay (Large end)
Leg (Large end)
Caster
■ YM-410D
Accidental tone bars Rail Natural tone bars Suspension cord
Frame end
Leg (Small end) Leg (Large end) Reinforcement stay (Small end)
Resonators (Accidental tone side)
Caster (with brake)
Caster
25
02_ym460_en. indd 25
14/10/10 9:43
YM-460/460F/410/410F/46/41/2400/2400R
CONFIRMATION OF PACKING CONTENTS
The shipping carton of your marimba should contain the parts shown below. Before assembling the instrument, confirm that all parts are included as listed.
* In the event that a part is missing, please contact the shop where the instrument was purchased.
q Natural tone bars
y Rail (1)
YM-460/460F/46/2400/2400R: Two-section folding type YM-410/410F/41: One-piece type
u Rail (2) w Accidental tone bars
YM-460/460F/46/2400/2400R: Two-section folding type YM-410/410F/41: One-piece type Rail clamp
Threaded hole
i Rail (3) e Resonators (Natural tone side)
YM-460/460F/410/410F/46/2400/2400R: 2 sections plus wing bolts x2 YM-41: One-piece type YM-460/460F/46/2400/2400R: Two-section folding type YM-410/410F/41: One-piece type Clamp on both sides
o Rail (4)
YM-460/460F/46/2400/2400R: Two-section folding type YM-410/410F/41: One-piece type
r Resonators (Accidental tone side)
YM-460/460F/410/410F/46/2400/2400R: 2 sections plus wing bolts x2 YM-41: One-piece type
YAMAHA logo
!0 Leg (Large end)
YM-460/460F/410/410F/ 2400/2400R: With height adjustment YM-46/41: Without height adjustment
t Reinforcement stay
YM-460/460F/46/2400/2400R: 2 sections YM-410/410F/41: One-piece type For bass side (YM-460/460F/2400/2400R)
!1 Leg (Small end)
YM-460/460F/410/410F/2400/2400R: With height adjustment YM-46/41: Without height adjustment
For high register side (YM-460/460F/2400/2400R)
26
02_ym460_en. indd 26
14/10/10 9:43
YM-460/460F/410/410F/46/41/2400/2400R
ASSEMBLY
For safety, the instrument should be assembled by at least two persons in a location with sufficient space. A mark “B” is printed on the large end face of the rail (2) and the groove section of the frame end of the large end leg. * Do not insert one side of the rail all the way down first, but push both sides into grooves alternately little by little until both sides are inserted fully and stop.
Tone bar height can be adjusted at this point. (1) Tone bar posts
High register side
C D
B
A
Player side
Frame end
Bass side
Audience side
Rail (2)
2-2. After confirming that legs on the left and right sides are vertical, use the screw to connect the end of the stay to the hole for attaching the stay in the long frame (2) and firmly tighten the screw. When leg height is set low, use the hole closer to the center of the instrument, and when the leg height is high, use the outer hole and tighten the screw firmly. A mark “C” is printed on the large end face of the rail (3) and the groove section of the frame end of the large end leg. 2-4. Engage the short rail clamp located at the center of the rail (3) with the rail (2).
Slant shaft
29
02_ym460_en. indd 29
14/10/10 9:43
YM-460/460F/410/410F/46/41/2400/2400R ASSEMBLY
c Attach the resonators.
3-1. Assemble the resonator pipes of the YM-460/460F/410/410F/46/2400/2400R. Make sure that the natural tone and accidental tone sides are properly assembled. 3-2. Insert the resonators into the resonator holders on the frame ends in the same way as the rails. Place the bass side of the resonators into the center grooves on the resonator holder. * Make sure not to confuse the natural tone resonators and accidental tone resonators. * Take care not to bump the resonators against the legs, etc.
Resonators (Natural tone side)
Resonators (Accidental tone side)
* The resonators are factory adjusted so that the optimum resonance level is obtained at 23°C. If desirable resonance is not available due to the temperature lower or higher than 23°C, adjust setting of the resonators. Move the resonators to fit into longer grooves when the temperature is higher and into shorter grooves when the temperature is lower. [. . . ] * Take care not to bump the resonators against the legs, etc.
Resonators (Natural tone side)
Resonators (Accidental tone side)
* The resonators are factory adjusted so that the optimum resonance level is obtained at 23°C. If desirable resonance is not available due to the temperature lower or higher than 23°C, adjust setting of the resonators. Move the resonators to fit into longer grooves when the temperature is higher and into shorter grooves when the temperature is lower. Temperature Higher Around 23°C Lower Grooves to use Short groove (“A” in the figure below) Center groove (“B”) Long groove (“C”) Resonator holder
A : For a higher temperature B : For a temperature around 23°C C : For a lower temperature
37
02_ym460_en. indd 37
14/10/10 9:43
YM-410D ASSEMBLY
v Insert the rail (1) into the frame ends of the legs.
4-1. Insert the outer rail (1) in the same way as the inner rails (2), (3) and (4). [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE YAMAHA YM-460 YM-460F YM-410D YM-410 YM-410F YM-46 YM-41 YM-2400 YM-2400R
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual YAMAHA YM-460 YM-460F YM-410D YM-410 YM-410F YM-46 YM-41 YM-2400 YM-2400R will begin.