User manual YAMAHA WR250X
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual YAMAHA WR250X. We hope that this YAMAHA WR250X user guide will be useful to you.
You may also download the following manuals related to this product:
YAMAHA WR250X (2232 ko)
YAMAHA WR250X (2243 ko)
YAMAHA WR250X (2181 ko)
YAMAHA WR250X (2157 ko)
YAMAHA WR250X (2225 ko)
YAMAHA WR250X (2191 ko)
Manual abstract: user guide YAMAHA WR250X
Detailed instructions for use are in the User's Guide.
[. . . ] Read this manual carefully before operating this vehicle.
OWNER'S MANUAL
WR250X
32D-28199-E3
EAU46090
Q Read this manual carefully before operating this vehicle. This manual should stay with this vehicle if it is sold.
INTRODUCTION
EAU10102
Welcome to the Yamaha world of motorcycling!As the owner of the WR250X, you are benefiting from Yamaha's vast experience and newest technology regarding the design and manufacture of high-quality products, which have earned Yamaha a reputation for dependability. Please take the time to read this manual thoroughly, so as to enjoy all advantages of your WR250X. [. . . ] Hydraulic brake service Regularly check and, if necessary, correct the brake fluid level. Every two years replace the internal components of the brake master cylinders and calipers, and change the brake fluid. Replace the brake hoses every four years and if cracked or damaged.
G G G
6-6
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU18771
Removing and installing panels
The panels shown need to be removed to perform some of the maintenance jobs described in this chapter. Refer to this section each time a panel needs to be removed and installed.
2. Pull the front part of the panel outward, and then remove the panel by pulling it off.
PERIODIC MAINTENANCE AND ADJUSTMENT
To install the panel 1. Place the panel in the original position, and then install the collars and bolts. Place the panel in the original position, and then install the bolt.
1. Lift the bottom of the panel slightly, and then slide the panel forward. To install the panel Place the panel in the original position, and then install the bolts.
2. Install the seat.
6-8
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU19622
Checking the spark plug
3
The spark plug is an important engine component, which should be checked periodically, preferably by a Yamaha dealer. Since heat and deposits will cause any spark plug to slowly erode, it should be removed and checked in accordance with the periodic maintenance and lubrication chart. In addition, the condition of the spark plug can reveal the condition of the engine. The porcelain insulator around the center electrode of the spark plug should be a medium-to-light tan (the ideal color when the vehicle is ridden normally). If the spark plug shows a distinctly different color, the engine could be operating improperly. If the spark plug shows signs of electrode erosion and excessive carbon or other deposits, it should be replaced.
Specified spark plug: NGK/CR9EK
2 1
Panel D To remove the panel 1. Place the panel in the original position, and then install the washer and bolt.
2. Install the seat.
6-9
PERIODIC MAINTENANCE AND ADJUSTMENT
Before installing a spark plug, the spark plug gap should be measured with a wire thickness gauge and, if necessary, adjusted to specification. 1 2 3 installing a spark plug, a good estimate of the correct torque is 1/41/2 turn past finger tight. However, the spark plug should be tightened to the specified torque as soon as possible.
EAU45141
Engine oil and oil filter element
The engine oil level should be checked before each ride. In addition, the oil must be changed and the oil filter element replaced at the intervals specified in the periodic maintenance and lubrication chart. Place the vehicle on a level surface and hold it in an upright position. Start the engine, warm it up for several minutes, and then turn it off. [. . . ] Install the spark plug cap onto the spark plug, and then place the spark plug on the cylinder head so that the electrodes are grounded. Remove the spark plug cap from the spark plug, and then install the spark plug and the spark plug cap. To prevent damage or injury from sparking, make sure to ground the spark plug electrodes while turning the engine over. [EWA10951] 4. Lubricate all control cables and the pivoting points of all levers and pedals as well as of the sidestand/ centerstand. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE YAMAHA WR250X
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual YAMAHA WR250X will begin.