User manual YAMAHA MG24 14FX
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual YAMAHA MG24 14FX. We hope that this YAMAHA MG24 14FX user guide will be useful to you.
You may also download the following manuals related to this product:
YAMAHA MG24-14FX (7197 ko)
YAMAHA MG24-14FX (9341 ko)
YAMAHA MG24-14FX (655 ko)
YAMAHA MG24-14FX (7169 ko)
YAMAHA MG24-14FX (7167 ko)
YAMAHA MG24-14FX (7244 ko)
YAMAHA MG24-14FX (9 ko)
Manual abstract: user guide YAMAHA MG24 14FX
Detailed instructions for use are in the User's Guide.
[. . . ] MIXING CONSOLE
Owner's Manual
MG32/14 FX
MG24/14 FX
E
Important Notice connecting a lamp
Please read carefully before connecting a lamp to the LAMP Jack. (page 18)
· Do not use a lamp that grounds Pin 2 or Pin 3 to the shell (body). Correct lamp type
Shell
1
1 3 2
Wrong lamp type
2 3
1 3
2
· Do not inadvertently connect a talkback microphone to the LAMP jack. Pin 1 is not connected.
E
Wichtiger Hinweis eine Leuchte anschließen
Bitte lesen Sie diesen Abschnitt sorgfältig, bevor Sie die Leuchte an der Buchse LAMP anschließen. [. . . ] The upper PRE switch controls the signal to AUX1 and AUX2; the lower switch controls the signal to AUX3 and AUX4. If the switch is on ( ), the mixer feeds the pre-fader signal to the corresponding buses. If off ( ), the mixer feeds the post-fader signal.
NOTE There is no PRE switch for AUX5 and AUX6. For these buses only the post-fader signal is available.
B PEAK indicator 7 EFFECT Controls
These knobs adjust the channel's signal levels into EFFECT buses 1 and 2. Since the signal to the EFFECT buses is post-fader, the level is always determined by the combination of the EFFECT control and the channel fader. On stereo channels, the L (odd) and R (even) input signals are mixed before moving into the EFFECT bus.
NOTE These knobs operate as EFFECT controls only if the AUX5/AUX6 switch is in off position ( ). If the switch is on, these knobs adjust the output to the AUX5 and AUX6 buses. (See 8 below. )
Lights up when the channel's post-equalizer signal level comes within 3 dB of the clipping level.
C SIGNAL indicator
Lights up when a signal is being input into the channel.
D GROUP Switches
Use these switches to feed the channel's signal to the GROUP 1-2 and/or GROUP 3-4 buses. Setting the switch on ( ) causes the signal to feed into the corresponding GROUP buses.
NOTE These switches allow you to independently assign the signal to groups regardless of the setting of the ST switch (E).
8 AUX5, AUX6 Switch
Selects whether the channel signal is sent to AUX buses 5 and 6 or EFFECT buses l and 2. If the switch is on ( ), the signal goes to AUX5 and 6 buses; if off ( ), the signal goes to the EFFECT buses. Note that the signal to these buses is always post-fader.
E ST Switch
Set this switch on ( bus. ) to feed the channel's signal to the ST
F Channel Fader
Adjusts the output level of the channel's signal. Use these faders to adjust the volume balance among the various channels.
NOTE To reduce noise, set the fader sliders for unused channels all the way down.
9 PAN Control (Monaural Channels) BAL Control (Stereo Channels)
The PAN control adjusts the signal's pan positioning into the Group 1-2 bus pair, into the Group 3-4 bus pair, and into the Stereo bus's L and R lines. The BAL control knob sets the balance between left and right channels. Signals into the L input (odd channel) feed to the Group 1 and Group 3 buses and to the L line of the Stereo bus. Signals into the R input (even channel) feed to the Group 2 and Group 4 buses and to the R line of the Stereo bus.
NOTE If you are inputting to a stereo channel through the L (MONO) jack only, the BAL knob operates as a PAN knob.
MG32/14FX, MG24/14FX
11
Front & Rear Panels
G PHANTOM +48 V Switch
Toggles phantom power on or off to a set of eight adjacent channels. The MG32/14FX has three of these switches: for CHs 1 to 8, for CHs 9 to 16, and for CHs 17 to 24. If using condenser microphones, set the switch on ( ) for all channels to which these microphones are connected.
NOTE If this switch is on ( ), the mixer supplies DC +48 V power to pins 2 and 3 of all XLR-type jacks in the corresponding channels. · Be sure to leave these switches off ( ) if you do not need phantom power. Humming or damage may result if you connect to an unbalanced device or to an ungrounded transformer while this switch is on ( ). But note that the switch may be left on without problem when connecting to balanced dynamic microphones. · To avoid damage to speakers, be sure to turn off amplifiers (or powered speakers) before turning these switches on or off.
Monaural channels
Stereo channels
12
MG32/14FX, MG24/14FX
Front & Rear Panels
Master Control Block
I STEREO/MONO Section
You use this section to independently adjust the levels of the outputs from the ST bus. [. . . ] Delay time Room size Pitch Depth Drive 0800 ms 0. 110. 0 12+12 0100% 0100
Modulation frequency 0. 054. 00 Hz Modulation frequency 0. 0510. 00 Hz
An effect that adds modulation to the sound.
· EFFECT 2
0 A B C D E F EARLY REF. GATE REVERB VOCAL DOUBLER SYMPHONIC FLANGE DISTORTION TAP DELAY An effect produced by modifying the early reflections. This effect sets the delay time to the interval at which you actually press the switch. Room size Room size Pitch fine Depth 0. 110. 0 0. 15. 0 050 0100%
Modulation frequency 0. 054. 00 Hz Drive Feedback gain Delay time 0100 099% 100 ms (600 bpm) 2690 ms (22. 3 bpm)*
* The LED can not blink any faster than an interval of 256 ms (234. 3 bpm).
24
MG32/14FX, MG24/14FX
Appendix
Dimensional Diagrams
I MG32/14FX
101
765
98. 5
1027
140
Unit: mm
I MG24/14FX
101
557
98. 5
819
140
Unit: mm
MG32/14FX, MG24/14FX
415 551
48
415 551
48
25
Appendix
Block and Level Diagram
26
MG32/14FX, MG24/14FX
Appendix
MG32/14FX, MG24/14FX
27
For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE YAMAHA MG24 14FX
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual YAMAHA MG24 14FX will begin.