User manual YAESU PEP9000 UPDATE V0518 AND V11.53

[. . . ] You may also order by email to Vertex Standard parts department, . The software updates will work with PEP9000 all versions (AF, AS, EU, NA, OC, SA or all Countries) of the FTdx9000Contest, FTdx9000D and FTdx9000MP Ver. 0518 MAIN implements improvements (also includes all previous updates): · · · · · The CW MEMORY KEYER MESSAGE TEXT save is corrected. The FH-2 [<-][->] keys are made to increment the frequency at 100kHz up or down. [. . . ] * The PEP_9000 EDSP folder includes a new software writer EDSP V2. 00; it no longer requires the four DLL files that were needed by V1. 03. We recommend you use the V2. 00 writer and remove V1. 03 and the four DLL files from you PC. MAIN CPU This procedure is used for uploading new Software into the FTdx9000 Amateur Transceivers using the CT-119 program cable. If you have the 8-pin mini-DIN PGM-SW (P0091526) refer to the page 4. *Don't forget to write down (or save to a CF Card) any personal menu settings you have changed from the default before you start. Please see the Data Management Operation Manual for the procedure to save your settings to a CF card. (1) Turn off the main power switch located on the back of the FTdx9000 (or turn off the power supply for FTdx9000MP and wait a minute, until the capacitors discharge) and remove the AC power cord. (2) Connect the CT-119 cable's DB-9F connector to the serial port COM1 in the back of your computer. Plug the mini-DIN connector of the CT-119 into the ACC jack connector on the rear of the transceiver. If you use a USB to serial adapter, you might need to change the COM-Port number. Main Power SW ACC (3) Connect the AC power cord (in the case of the FTdx9000MP connect the power supply cables). (4) Turn on the main power switch located on the rear panel of the FTdx9000 (or on the top of the power supply for the FTdx9000MP). [NOTE: The radio will not show a display now. ] (5) Now go to the desktop and find the FSW004 as shown below. Double-click the FSW004 icon, displayed on the Program Screen. (6) When the program opens, confirm that the file AH010N_V0518. SFL is highlighted; if not, click on it to highlight it. A green status bar should appear below the [WRITE] button to show the progress of the download. Located on the rear panel of the FTdx9000 (or on the top of the power supply for the FTdx9000MP. Remove the CT-119 cable from the DB-9F connector of your computer and the ACC connector on the rear of the transceiver. (10) Turn on the main power switch located on the back of the FTdx9000 (or on the top of the power supply for FTdx9000MP). (11) Press and hold in the [FAST] and [LOCK] keys while turning the radio back on. Follow the instructions below to update the EDSP. 8-pin mini-DIN PGM-SW 1. I choose the . sfl file of the version V0518 to write in and push WRITE of the screen. Reset the radio to default. NOTE: for a more detailed description see the Main CPU programming. EDSP This procedure is used for uploading new EDSP Software into the FTdx9000 Amateur Transceivers, from your personal computer, using the RS-232C, DB9F to DB9F straight cable. 1. Turn off the main power switch located on the back of the FTdx9000 (or turn off the power supply for FTdx9000MP and wait a minute, until the capacitors discharge) and remove the AC power cord. [. . . ] Turn the front Power Switch and the Main Power Switch in the back OFF (or turn off the power supply for FTdx9000MP and wait a minute, until the capacitors discharge) and remove the AC power cord. The updating process is now complete It is important to reset the FTdx9000. Press and hold in the [FAST] and [LOCK] keys; while holding them in, turn the radio back on (this resets the radio and locks in the new software). [. . . ]