User manual YAESU FT DX 9000 TFT

[. . . ] FTDX9000 TFT OPERATION MANUAL FTDX9000 TFT OPERATION MANUAL PLEASE READ THIS FIRST When turning on the transceiver for the first time, please set the local time as soon as possible. If this is not done, the various functions of the World Clock and Great Circle Map will not function correctly. Note: If you wish to add a city to the City List that was programmed at the factory, you will need to supply your own USB or PS2 Keyboard. If you utilize one of the pre-loaded cities, a keyboard is not necessary. [. . . ] The sweep speed will increase as follows: 50 %: about 2 times faster, 30 %: about 3 times faster, 10 %: about 10 times faster 1. By pressing the [F7](CTR/FIX) key repeatedly, the CTR mode and the FIX mode will be toggled alternately. By pressing the [F2](SPAN) key, you can set the bandwidth of the span viewed using the Spectrum Scope. By pressing the [F3](ATT) key, the attenuation will change as follows. By pressing the [F6](LBWS) key, the LBWS segment width will change as follows. Advice:Please note that the LBWS feature can not be used in the FIX mode. While using LBWS, it is not possible to switch to the dual display mode. Note:The QMB marker will not appear on the screen while LBWS is engaged. "LBWS" Select "LBWS" Select Page 16 FTDX9000 TFT OPERATION MANUAL SPECTRUM SCOPE USING THE FIX (FIXED) MODE This feature is convenient when you want to monitor an entire amateur band. The starting point, located at the left edge of the screen, can be set via the Menu. Even if the screen span (bandwidth) is changed, the start frequency will not be changed. By watching the screen, you can move your operation to frequencies where interesting activity appears on the display. Just as with the CTR mode, it is possible to toggle the Main (VFO-A) or Sub (VFO-B) VFOs. It is also possible to utilize a dual display, with the Main (VFO-A) VFO in the upper position, and the Sub (VFO-B) VFO below. By pressing the [F7](CTR/FIX) key, it is possible to switch between the CTR mode and the FIX mode. Press the [F2](SPAN) key to set the desired value for the Span (bandwidth). By pressing the [F3](ATT) key, the attenuation will change as follows. Press the [F4](A/B) key to toggle between the Main (VFO-A) and Sub (VFO-B) VFOs. The Main VFO will appear in the upper display field, and the Sub VFO will appear in the lower. If the receive frequency is outside of the screen, the position of the operating frequency will be "shown" in the lower area of the display as "<<" ">>", and "RCV Freq is out of range will also be range" RCV displayed. You may clear the "Average indication" or "Peak indication" which was set by TRACE MODE (See page 15) by pressing the [F7](REFRESH) key. Please see page 14 for information on using the marker. "SPAN" Select "ATT" Select "REFRESH" "CTR/FIX" Select SETTING THE LEFT EDGE FREQUENCY FOR THE FIX MODE Press the [MNU] key momentarily to enter the Menu mode. Select the item which you want to change by rotating the Main dial (in this case, the items will be in the range from "SCOPE 112 MAIN FIX 1. 8 MHz" to "SCOPE 133 SUB FIX 50MHz"). [. . . ] The menu mode will be reset, and the factory default configurations will come back. Page 42 FTDX9000 TFT OPERATION MANUAL USING THE MENU MODE EXPLANATION OF THE FUNCTION KEYS ON THE MENU MODE SCREEN [F2](LOAD) Press this key to download previously-used Menu settings from the CF card to the transceiver. [F6]( ) This is the "down" key for scrolling through the menu mode list. The items also can be selected by rotating the Main Tunig knob. [F3](SAVE) Press this key to save the current Menu settings to the CF card. [F7]( ) This is the "up" key for scrolling through the menu mode list. When you have completed making all changes to the menu setting(s), press the [MNU] key for 2 seconds to lock in the changes. If you do not want to keep the changes, press the [MNU] key only momentarily; the radio will come back to the previous menu status that was present before you made the changes. [F4]( ) Use this key to select the configuration value of the menu item. [. . . ]