User manual VIVITAR VIVICAM 8300S

[. . . ] Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] ] Panorama Select this mode to take a series of shots then stitch them [ together with software to make a single photo. ] Landscape Select this mode to capture an image with infinity focus, [ hard sharpness and high saturation. [ ] Candlelight Select this mode when you want to capture photos of candlelit scene, without spoiling the atmosphere. [ TEXT ] Text Select this mode when you want to capture an image that contains black and white subjects like printed documents. ] Sunset Select this mode when you want to capture photos of sun[ set scene. Select this mode when you want to capture photos of sun] Sunrise [ rise scene. [ [ EN-42 ] Splash Water ] Firework Select this mode when you want to capture photos of splashing water. Select this mode when you want to capture fireworks clearly with optimal exposure. The shutter speed be comes slower, so using a tripod is recommended. Digital Camera >> The available capture menu in scene mode: Auto Panorama Landscape Candlelight Text Sunset Sunrise Splash Water Firework User's Manual >> Size Quality Sharpness Saturation Color White Balance Manual WB ISO Metering * : Available X: Unavailable EN-43 Setting the Panorama Mode This mode is designed to make it easier to take a series of shots then stitch them together with software to make a single photo. You can capture a photographic subject that won't fit into a single frame, such as a landscape, and stitch it together later with a program such as Cool 360 or Photoshop application. Orient the ViviCam 8300s so that the second frame overlaps a small portion of the photographic subject of the first image and press the shutter button to capture the next image. Finish the sequence by pressing the MENU button or switch to another mode after the last image has been recorded. EN-44 Digital Camera >> [ ] Movie Mode This mode allows you to record video clips at a resolution of 320 x 240 / 640 x 480 pixels. Pressing the shutter button again will end the recording and save the video on the SD card. The recording time depends on the storage size and the subject of the image to be recorded. You can record video clips with Audio freely, but no zoom function at this condition. User's Manual >> EN-45 When recording video clips, the flash cannot be used. While the image is being recorded into the SD card, do not open the battery/SD card cover, nor remove the battery or SD card. Doing so might damage the SD card or destroy the data. [ ] PLAYBACK MODE Playing Back Still Images You can play back the still images on the LCD monitor. Insert the SD card into the ViviCam 8300s and turn on the power before starting. The images can be fed in reverse or fed forward with the / buttons. EN-46 Digital Camera >> Image Display Information You can switch the state of the information display by pressing the button when playing back images. button switches the information Each press of the display state in the following order: 01/01/2005 10:10 1853KB Pressing the / buttons during image playback will rotate the image 90 degrees. The button rotates the image clockwise, whereas the button rotates the image counterclockwise. A press of the button opposite to the direction in which the image was rotated will return the image to the normal display. [. . . ] 150 g (without the battery & SD card) User's Manual >> * Design and specifications are subject to change without notice. EN-81 TROUBLESHOOTING Refer to the symptoms and measures listed below before sending the ViviCam 8300s for repairs. If the problem persists, contact your local reseller or service center. EN-82 Digital Camera >> Power Supply Symptom Cause The battery is not loaded. Recharge or use the AC power adapter. The power cuts out during use. The battery runs out quickly. The battery or ViviCam 8300s feels warm. The AC power adaptor is not Reconnect it properly. [. . . ]