User manual VIVITAR VIVICAM 3635

[. . . ] Vivicam 3635 User Manual English 021009 Warranty Policy This camera is under warranty for one full year from the date of purchase by the original purchaser. In case of defects in materials or workmanship, we will replace or repair the camera free of charge. This warranty does not include batteries, or other accessories that have not been manufactured by our company. This warranty will not be honored if the camera has been mishandled or tampered with, or altered by anyone other than the manufacturer. [. . . ] Use the LCD as a viewfinder monitor for recording. 1 2 3 4 5 Set the main switch on the top of the camera to Press the PICTURE button to set the picture quality . The lens will extend. Press the DISPLAY button to turn on the LCD monitor. Apply the same procedure as the normal recording to take a close-up shot. (Refer to normal recording from step 5 to 7 at (page15) Focus adjustment may be difficult for the following condition: A location where the subject or background is extremely dark. Objects with no contrast , flat objects with only horizontal lines, fast moving objects, poorly lit objects , objects with strong backlight or reflecting light, and objects that flicker such as fluorescent lighting. 20 (Self-timer) Mode This mode automatically releases the shutter after a delay so that the person making the recording can be included in the image. The self-timer LED on the front of the camera will flash in red and the shutter will be released after about 10 seconds. The delay time can be set to either 10 sec (default setting) or 3 sec in the SET-UP menu. using the MODE button. To cancel the self-timer, select a mode other than Adv Recor ecording C hapter 3 Ad v anced Recor ding Using the M-REC menu The main switch of the camera can be set to , so that recording can be made with user-defined settings. M-REC menu contains Movie mode, Digital Zoom, Camera Exposure, White Balance, AE mode, Slow Shutter, Screen Contrast and Black & White sub-menus. To access the M-REC menu and how to change the settings, perform the following steps : 1. If this occurs, turn the main switch to OFF and then turn it back to 2. (See Recording page15. ) 1 2 3 M OFF 4 5 21 The menu settings that have been made will be saved even when the power is turned off. The settings set in the M-REC menu will not have any effect when the main switch is set to . Recording a Movie Movies can be recorded with this camera. The available recording resolutions are: 320 X 240 pixels and 160 X 120 pixels. The maximum recording time for a movie is about 15 seconds and recording continues while the shutter button is held down. When the movie mode is set, all menus with the exception of Reset All and Screen Contrast will become unavailable. Enter the M-REC menu mode and press the / button to select Movie mode. Press the / button to select Off (default setting), 320 x 240 or 160 x 120. Through images will be displayed on the LCD monitor with a yellow frame. And the resolution will be displayed in the upper left of the screen, and the recording time will be displayed in the upper right of the screen. When the movie mode is selected and the main switch is set to , the LCD monitor will automatically turn on and display through image. (The LCD monitor will not turn off even when pressing the DISPLAY button. ) 4. [. . . ] When the 3 seconds are over, the LCD Monitor will return to viewfinder mode or automatically turned it off. During this 3 seconds of preview in either case, the user will have the option, by means of an on-screen prompt, of saving the image just captured by selecting the YES and pressing the OK button or deleting the images by selecting No and pressing the OK button. If there is no key operation within the 3 seconds, the image is automatically saved. Setting the date 1. Enter the SET-UP mode and press the / button to select Date & Time. [. . . ]