User manual VENOM VR3T

[. . . ] Trim Power Switch Antenna AUX Channel Steering Wheel VEN-8181 Thank you for purchasing the Venom VR3T 2. 4 GHz Transmitter. The VR3T 2. 4 GHz Transmitter has all of the great features of its FM predecessor including 3rd Channel Mixing, 16 Model Memory, and thumb switch activated Programmable Steering Dual Rate, with the stability and reliability of 2. 4ghz technology. With the freedom of 3rd Channel mixing, the VR3T 2. 4 has so many high-end features you won't need to look anywhere else for a 2. 4ghz transmitter. TH. Trigger NAVIGATION KEYS NOTE: Make sure the polarity of the 8 AA Alkaline batteries are correct when they are put into the transmitter. In order for these settings to be programmed into the VR3T 2. 4 the following steps must be followed. [. . . ] 1) Press ENTER to enter the FUNCTION menu 2) Use the +/- Keys to select the ABS function and press ENTER Press enter to select WC value. Us the +/- to change INH, TH, AUX, TH & AUX 4) 5) 6) 7) NOTE: In MODE, if the INH is selected, the ABS feature is disabled. If TH & AUX is selected, braking occurs with both the Throttle and AUX channels. Sets the rate the servo returns versus trigger operation for brake release. Sets the proportion of time that the brakes are being applied and released by pulse operation. Mode: Sets the channel(s) that the ABS feature will operate on. 6 2. 8 FUNCTION / MDL (MODEL) MDL - MODEL (MDL) - The Model Function used to choose one of the 16 model profiles available and create, edit and copy them as needed. SEL - SELECT 1) Press ENTER to access the model memory. 4) Press EXIT to save and return to FUNCTION MENU, press EXIT again to return to the Main Screen. EDT - EDIT SEL - SELECT 1) Press ENTER to access the model profile. 4) Press EXIT to save and return to FUNCTION MENU, press EXIT again to return to the Main Screen. CPY - COPY EDT-EDIT 1) Press ENTER to access the model profile. 2) Use the +/- KEYS to choose a model profile to copy onto another selected profile. 4) Press EXIT to save and return to FUNCTION MENU, press EXIT again to return to the Main Screen. TERMS: F-FORWARD, B-BACK, ST-STEERING, TH-THROTTLE, AUX-AUXILLIARY CPY - COPY 2. 9 FUNCTION / SPEED This function allows the speed of the Throttle Servo and Steering Servo to be set. In the Steering Speed menu, the Turning Speed and the Return Speed can be set. 5) Press EXIT TWICE to save and return to the FUNCTION MENU, press EXIT again to return to the main screen. ST - STEERING SPEED 7 2. 9 FUNCTION / SPEED (CONTINUED) B. 4) Press EXIT TWICE to save and return to the FUNCTION menu. TH-THROTTLE SPEED Terms: SPD. FL ­ Speed Forward Delay. When using a secondary braking system, it will control the rear brakes with the front brakes being controlled by the throttle brake. The TH TRIM and TH EPA is then used to fine tune the power and balance of the overall braking system. 1) Press ENTER to see the FUNCTION MENU 2) Use the +/- Keys to select the BK_MIX function. 4) Use the +/- Keys to change the value 5) Press EXIT TWICE to save and return to the FUNCTION menu. Terms: RATE ­ The rate of brake between the 3rd channel and the 2nd channel. EN ­ Option to Enable the Brake Mix feature. BIND SCREEN 9 2. 13 FUNCTION / MIX ( MIXING ) MIX - MIXING - used to mix between functions for greater control of the model. 5) Press EXIT to save and return to SYSTEM MENU, press EXIT to return to the FUNCTION MENU, press EXIT again to Main Screen. TERMS: EN-ENABLE, ST-STEERING, TH-THROTTLE, AUX-AUXILLIARY, 2. 14 FUNCTION / TH. [. . . ] It has been tested and found to comply with the limits set by the FCC which are designed to provide reasonable protection against such interference. FCC Warning: CAUTION: VenomTM is not responsible for any radio or TV interference caused by unauthorized modifications to this product. Changes or modifications not authorized by VenomTM will void all warranties. NOTE: This product has been tested and found to comply with the limits for a Class B digital device, compliant to Part 15 of the FCC Rules. [. . . ]