User manual TEKA LI2 1200

[. . . ] 3 85 The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, wich could otherwise be caused by inappropriate waste handling of this product. Please contact your local city office, your household waste disposal service or the shop where you purchased the product 27 26 490 ENGLISH Important Safety Instructions Electrical Safety · Any repairs must be carried out by an authorised Teka Ser vice Agent, using original spare parts. [. . . ] Safety for Children · The appliance is not intended for use by young children or infirm persons without super vision. Young children should be supervised to ensure they do not play with the appliance. · Do not allow children to approach the oven while it is in use, as high temperatures can be reached. Oven Safety in Use · The manufacturer will not be held responsible if this oven is used for anything other than domestic purposes. · Do not store oils, fats or inflammable materials inside the oven, as it could be dangerous if the oven is switched on. · Do not lean or sit on the open door of the oven as it could damage the door and be dangerous for you. · Do not cover the bottom of the oven with aluminium foil, as it could affect cooking and damage the interior enamelling of the oven. · To use the oven, insert the tray or rack supplied onto the side guides inside the oven. The trays and racks are fitted with a system to facilitate partial extraction and make handling easier. · Do not spill water on the floor of the oven while it is working as this could damage the enamel. · While using the oven, open the door as little as possible to reduce electricity consumption. 5 Insert the supports on the interior glass into the grooves at the top of the door (C). · Loosen the lens from the lampholder with the help of the appropriate tool. Trouble Shooting The oven does not work Check the connection to the electrical circuit. Check the position of the function and temperature selectors Smoke is given off while the oven is working D This is normal during its first use. Do not use higher temperature settings than those in the cooking tables. C · Exchange the bulb. · Replace the lens, making sure it fits in the correct position without forcing it. The inside light of the oven does not work Change the bulb. The heating indicator light does not work Expected cooking results are not achieved Review the cooking tables to obtain guidance on the working of your oven. Changing the oven bulb Caution To change the bulb, first ensure that the oven is disconnected from the power supply. · Ease out the chrome supports, releasing them from the bolt (E). Select a temperature. It should only light up while the oven is heating up to its set working temperature. NB If, despite these recommendations, the problem continues, contact our Technical Assistance Service. E The replacement bulb must be temperature resistant to 300 °C. These can be ordered from the Technical Service Department. 34 35 ENGLISH Technical Information If the equipment does not work, please contact the Technical Service Department and advise them of the problem, indicating: 1 Serial number (S-No) 2 Appliance model. (Model) You will find this information on the rating plate on the lower part of the oven when the door is opened. The item that you have bought meets the European directives on electrical material safety (73/23/CEE) and electromagnetic compatibility (89/336/CEE). AENOR certifies the aptitude of this appliance for the function and guarantees the truthfulness of all data shown in the energy card. providing a minimum depth of 580 mm. [. . . ] AENOR certifies the aptitude of this appliance for the function and guarantees the truthfulness of all data shown in the energy card. providing a minimum depth of 580 mm. · To fit multifunction ovens in their locations, the back part of the unit corresponding to the shaded area of figure 3, must not have any projections (reinforcements, pipes, sockets, etc). · The adhesive used for the plastic covering of kitchen furniture must be able to withstand temperatures up to 85ºC. mm to enable disconnection in the case of emergency, cleaning or bulb exchange. After connecting the electricity, check that all the electrical parts of the oven are working. Installing the Oven For all ovens and after carrying out the electrical connection, 1 Introduce the oven into the kitchen unit, taking care not to trap the cable. [. . . ]