User manual TEKA HLD45.15

[. . . ] To operate, simply touch the glass control symbols with your fingertip. The touch control sensitivity continuously adapts to the ambient conditions. Make sure the glass surface of the control panel is clean and free of obstacles when plugging in the oven. If the clock does not respond correctly when you touch the glass, unplug the oven for a few seconds and then plug it in again. [. . . ] The clock will then start counting down from the new time and the symbol will flash slowly. Timer alarm: The alarm will go off at the programmed time, even if the oven is not in use. Cooking Time (top and bottom cavity): This function allows you to programme the cooking time, after which the oven will turn off automatically. Cooking stop Time (top cavity only): This setting allows you to programme the time for cooking to stop, after which the oven will turn off automatically. Cooking Time and Cooking stop Time (top cavity only): This setting allows you to programme the cooking time and cooking stop time. The oven switches on automatically at the set time and operates for the selected cooking NoTE You cannot see the current time on the display when the timer alarm is set. Touch the sensor with your fingertip until the AUTO symbol starts to flash and 00:00 appears on the display. You will hear 2 beeps, the AUTO symbol will flash slowly and the display will show the time left before the oven switches off automatically. Once the cooking time is up, the oven will turn off, an alarm will sound and the AUTO symbol will flash quickly. You can change the remaining cooking time at any time by touching the sensor with your fingertip until the AUTO symbol starts to flash quickly. pRoGRammING CookING TImE FoR THE boTTom CavITy The oven incorporates pre-programmed settings for the bottom cavity cooking functions. You can modify these times using the + or ­ sensors to select the desired duration. Pizza Function: select the Pizza setting in the function control dial and the maximum temperature on the bottom cavity temperature control dial. A pre-programmed time of 8 min will appear on the clock/timer display. Use the + or ­ sensors to modify the cooking time according to your liking or the instructions that came with the pizza. noTE It is not necessary to preheat the oven to cook pre-cooked or frozen pizzas in the bottom cavity. Toast Function: select the Toast setting on the bottom cavity function control dial and the maximum temperature on the bottom cavity temperature control dial. Use the + or ­ symbols to change the cooking time according to your liking. Melted Cheese Topping Function: select the Melted Cheese Topping setting on the top cavity function control dial and the maximum temperature on the bottom cavity temperature control dial. A pre-programmed time of 6 min will appear on the clock/timer display. Use the + or ­ symbols to change the cooking time according to your liking. For all the above settings, once the cooking time is up, the oven will turn off, an alarm will sound and the AUTO symbol will flash quickly. [. . . ] When the cooking time is up, the oven will turn off, an alarm will sound, and the AUTO symbol will flash quickly. If you want to change the remaining cooking time while the oven is on, press the sensor until the AUTO symbol starts to flash quickly. cHIlD saFETy FUNCTIoN This function can be selected at any time while using the oven. To activate the function, press the + and ­ sensors at the same time for several seconds. [. . . ]