User manual SONY ERICSSON USB CABLE DCU-11

[. . . ] DCU-11 Installation Guide for Windows® 2000 Important note: To avoid loss of data, do not remove the USB data cable from the PC or the phone during data transfer. [. . . ] and then select Next (Figure 3). Figure 3 7) Check Specify a location, and select Next (Figure 4). Figure 4 8) Select Browse and point to the location where the driver files were copied to in step 1 and select OK (Figure 5). For this illustration, we made a folder called DCU11_drivers and put the driver files inside the folder. C:\DCU11_drivers Figure 5 9) To continue, select OK (Figure 5). 10) Select Next (Figure 6) to continue with the installation. c:\dcu11_drivers\suscom. inf Figure 6 11) The driver files will load to the PC and the installation process is almost complete! Figure 7 12) To complete the installation select Finish (Figure 7). Restart your computer. Verifying installation on Windows® 2000 systems: 1. From the Start Menu, select "Settings" then "Control Panel", and then double click on the "System" icon. Select the "Hardware" tab and then "Device Manager". The USB Cable DCU-11 can be found under "Ports", with the COM-port number shown in parentheses. [. . . ] From the Start Menu, select "Settings" then "Control Panel". [. . . ]