User manual SMC WHSG14-G

[. . . ] USER GUIDE SMCWHSG14-G EliteConnectTM 802. 11g Wireless Hotspot Gateway SMCWHSG14-G User Guide Copyright Notice Copyright © 2005-2015 SMC NETWORKS Inc. No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written permission. Disclaimer We shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. We reserve the right to change the product specification without notice. [. . . ] User Agreement Subscriber must accept the service usage agreement before they can access the Internet. WIFICOM Wireless Hotspot Gateway provides this Authentication for WIFICOM service provider to build up an Internet service with RADIUS server. (http://www. wificom. com) Wandering Wi-Fi Wireless Hotspot Gateway provides this Authentication for Wandering Wi-Fi service provider to build up an Internet service with RADIUS server. For the detail setup, please contact Wandering Wi-Fi. (http://wanderingwifi. com) Current User Information Backup 1 Min(s) The system provides automatically backup account information and unused account to flash ROM. Redirect Login Page URL Code Empty The input format can be http://www. yahoo. com. Copy and paste the following HTML Code into your home page to produce redirect subscriber login page. 59 SMCWHSG14-G Copy and paste the following HTML Code into your home page to produce user agreement login page. Figure 3-44 Preview Redirect Login Page Code Item SSL Login Page User Idle Time Out Default Disable 5 Minutes Description Enables or disables SSL security of login page. The user idle time out valid range is 1-1440. Click Apply button to save the new settings. 60 SMCWHSG14-G 3-2-5 RADIUS Authentication Figure 3-45 Authentication Setting Screen 61 SMCWHSG14-G Item Default Description Option: No Authentication or RADIUS Server. Disable (No Authentication) Subscriber can direct access the Internet without enter username and password. Enable (RADIUS Authentication) Wireless Hotspot Gateway provides "RADIUS Authentication" for service provider to build up an Internet service with RADIUS server. If RADIUS Authentication is enabled, all subscribers' authentication will send to RADIUS Server by RADIUS protocol (RFC 2865, 2866). RADIUS Authentication Disable Time to Finish/ Accumulation Primary RADIUS Server Server IP Authentication Port Enable Service provider provides two different accounting calculate for the Internet service. Empty 1812 Enter the IP address of RADIUS server. Enter the authentication port number; the authentication port number must match with the RADIUS server setting. The allowed numbers are from 0 to 65535. Accounting Port 1813 Enter the accounting port number; the accounting port number must match with the RADIUS server setting. The allowed numbers are from 0 to 65535. Share Secret Key Empty The share secret key, the key number also has to match with the Server setting. Up to 64 characters are allowed. Secondary RADIUS Server Server IP Authentication Port Empty 1812 Enter the IP address of RADIUS server. Enter the authentication port number; the authentication port number must match with the secondary RADIUS server setting. Accounting Port 1813 Enter the accounting port number; the accounting port number must match with the secondary RADIUS server setting. Share Secret Key Empty The share secret key, the key number also has to match with the secondary RADIUS Server setting. Retry times when Primary fail 62 1 Specify the retry times when primary fail. SMCWHSG14-G Item Retry Frequency ~ Seconds Accounting Service Interim Update Time Authentication Method WISPr Smart Client Enable Login Mode 3 Default Description The field default value is 3 seconds. Enable Enables or disables the accounting service. 5 Minutes Specify the interim update time. CHAP Enter the authentication method of RADIUS server. Disable Directly Reply Enables or disables WISPr Smart Client roaming function. Options: Directly Reply, Proxy Reply with "Redirect Login Page" URL and Proxy Reply with Specific URL. (Provided by your ISP). 63 SMCWHSG14-G 3-2-6 Billing The function is used to setup a billing profile. A billing profile is a description of how you want to charge your customer. Figure 3-46 Billing Setting Screen Item Pre-Paid Default Enable Description The subscribers can access Internet with pre-defined usage time. 64 SMCWHSG14-G If you change billing mode (Pre-paid Post-paid or Post-paid Pre-paid), the system will erase all account and disconnect all on-line users. Figure 3-47 Message Box Item Default Description Enables or disables the credit card service. [. . . ] Enter admin (default) as the Username and smcadmin (default) as the password and click Login. If you are first time setting the system, the wizard setup screen will appear Username: admin Password: smcadmin Figure 3-179 Administrator Account Login Screen (First Time) 169 SMCWHSG14-G Or Figure 3-180 System Quick View Web-Based Accounting Manager Step 1: Start your Web browser and enter the factory default IP address192. 168. 2. 1 in your browser's location box. Press Enter. Figure 3-181 Web Browser Location Field (Factory Default) 170 SMCWHSG14-G Step 2: The Wireless Hotspot Gateway configuration main menu will appear. Enter account as the Username and account as the password and click Login Figure 3-182 Web-Based Accounting Manager Login Screen Username: account Password: account Step 3: After a valid user name and password have been provided, the account Generator Panel homepage will appear. Figure 3-183 Account Generator Panel 171 SMCWHSG14-G Supervisor Account Step 1: Start your Web browser and enter the factory default IP address 192. 168. 2. 1 in your browser's location box. [. . . ]