User manual SMC PBX10

[. . . ] USER GUIDE SMCPBX10 TigerVoIP TM IP PBX Telephony System IP PBX Telephony System User Guide The easy way to make all your network connections 20 Mason Irvine, CA 92618 Phone: (949) 679-8000 E112007-EK-R01 Information furnished by SMC Networks, Inc. However, no responsibility is assumed by SMC for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of SMC. SMC reserves the right to change specifications at any time without notice. Copyright © 2007 by SMC Networks, Inc. [. . . ] It has one or more extensions to be registered to the IPPBX. 6. 3. 1 IP Phone The DEVICE PHONE MANAGEMENT page lets the administrator to create IP Phone 15 Please refer to 7 for details. Before a device can be reached from the IPPBX, the same account information has to be programmed into the device through the configuration interface enabled by the device. Select Device --> IP Phone to add, edit, delete and search devices. Go to Service --> IPPBX Service, and click RELOAD to activate changes. 6. 3. 1. 1 Add a Device 1. Enter a device name in the Device ID box, and a URL in the Device Administration URL box. Click ADD to see the newly added device in the Device ID. 6. 3. 1. 2 Edit a Device Once create the device, you can modify its information through the following steps. Modify the Device Administration URL and click LINK as a shortcut to the device administration URL. Click EDIT to see the Enable Automatic Client Configuration (ACC) page. Table 6. 3. 1 is a reference for detailed ACC settings which is used for auto-configuring IP phones. Click EDIT and then DISABLE to disable the function. 50 6. 3. 1. 3 Delete a Device 1. Click DEL to remove the device from the Device ID. 6. 3. 1. 4 Search a Device 1. Type a group ID in the Search box, or click a device ID in Device ID list. Click GO to see the data. Table 6. 3. 1 ACC (Automatic Client Configuration) Settings Field Device Description A unique ID containing alphabets, numbers, and underscore only without spaces; 32 characters maximum. The vendor Prefix's for SMC's IP Phones are as follows: Vendor Prefix SMCDSP-200 = dsp200 SMCDSP-205 = dsp205 SMCWSP-100 = wsp100 MAC Address Codec Preference MAC address of the device. Proxy IP/FQDN Proxy Port Registrar Redundant Servers IP/FQDN Registrar Port SIP Domain Specify IP address (or fully qualified domain name) and UDP port of the remote IPPBX. Specify IP address (or fully qualified domain name) and UDP port of the remote IPPBX Specify the SIP domain used by the proxy and registrar. VAD is a technique that detects absence of audio and Enable Voice Activity conserves bandwidth by preventing the transmission of "silent packets" over the network. DTMF mode Choose a DTMF mode used by the phone. Detection (VAD) 51 6. 3. 2 Extension of IP Phone The EXTENSION MANAGEMENT page allows the administrator create extensions. Select Device --> Extension of IP Phone, and one can add, edit, delete and search extensions. Go to Service --> IPPBX Service, and click RELOAD to activate changes. For example, extension A and B are within one IPPBX or a stacked cluster. Once extension B finishes the call, IPPBX will ring extension B within a minute. [. . . ] CLI Command: del rg <Group ID> SIP Trunk Configuration The administrator can display, add, edit or delete SIP trunk. CLI Command: list siptrunk <Trunk Identifier> / list siptrunk Add a SIP Trunk Add SIP trunk, and restart the PBX server in Admin Commands after adding the SIP trunk. CLI Command: add siptrunk <Trunk Identifier> Note: Some items have default values, and the administrator may need to modify those values. Modify a SIP Trunk 111 The administrator can modify SIP trunk. Restart the PBX server in Admin Commands after modifying the SIP Trunk. [. . . ]