User manual SMC NAS02

[. . . ] TigerStoreTM 2 Bay Network Attached Storage SMCNAS02 SMCNAS02 User's Guide Revision 1. 8 January 2008 TRADEMARKS All brand and product names are trademarks or registered trademarks of their respective companies. NOTE The information in this manual is subject to change without notice. SMC Networks, Inc. product comes with a 2-year limited warranty from the date of purchase. will, at its discretion, repair or replace the product at no charge, provided the product has not been subjected to misuse, abuse or non-SMC Networks, Inc. [. . . ] Enter the default User name "admin" and the default Password "smcadmin" then select the desired language. The Storage System Management homepage contains six tabs namely, My NAS, Users & Groups, Shared Folders, Disk, Advanced, and Logout appears. 60 3. 3 My NAS Page Displays a list of your storage system information (NAS name, Middleware and Flash version, MAC and IP address, Subnet mask, Gateway IP address, Disk Mode, System and Data utilization) and Current Connections (Shared folders, Users, and Login Time). Data utilization: shows the current data partition usage. 61 System Setting Allow you to specify the storage system name, date, time, time zone, NTP server name or IP address, administrator name, and password. On the My NAS page, click System setting and the following screen appear. NOTE: Be careful when changing the Storage System Name. Inform your clients of any change of this column for providing available function, including shared folders or backups. 62 To change this . The name can be up to 15 characters long and can include letters, numbers, and hyphens. In the Time zone list, select the time zone. Date, Time, Time zone NTP server name or IP address Enter the name or IP address of the Network Time Protocol server from which the storage system could adjust its time automatically. Can include only letters (uppercase and lowercase A~Z), numbers (0~9), hyphens (­), underlines (_), and dots (. ). The IP address' maximum number of character is 15 (including the three ". "). The format is xxx. xxx. xxx. xxx and the value of xxx is between 0 and 255. Administrator name Password Confirm password In the Administrator name field, enter the administrator name for logging in to the Storage System Management. In the Password and Confirm password fields, enter the password for logging in to the Storage System Management. When the confirmation message appears, click OK for the changes to take effect. 63 Network Setting Allow you to configure the network settings that include the workgroup name, MAC address, and FTP server settings. NOTE: The time between ADS's and the Samba server must be in sync (use NTP). You only can choose the "workgroup" of NAS or "AD full domain" If AD domain is selected, user cannot use the local user account to connect to NAS via Samba. "~", "!", "#", "$", "%", "^", "&", "(", ")", "-", "{", "}", ". ", "'", and space can be included in AD account. 64 1. Click Network setting and the following screen appear. 65 To change this . Can include only letters (uppercase and lowercase A~Z), numbers (0~9), hyphens (­) and underlines (_). The first character must be a letter (uppercase and lowercase A~Z). Get an IP address automatically Use this IP address IP address Subnet mask Gateway IP address DNS server settings FTP server settings If you have a DHCP server on your network, the server can get its IP address from that DHCP server automatically. If you do not have a DHCP server, you must specify an IP address, subnet mask, gateway IP address, and DNS server. NOTE: Maximum number of characters is 15 (including the three ". "). The format is xxx. xxx. xxx. xxx and the value of xxx is between 0 and 255. Allows your storage device to perform as an FTP server, and it is highly recommended to download the data transfer tool from http://filezilla. sourceforge. [. . . ] To do so, please go to the Advanced Menu in the WEB UI and click Shutdown on the left side. Once the unit did shutdown, please make sure the power is off by selecting the "0" position for the Power Switch on the back of your SMCNAS02. Take out all disks and follow the instructions in the chapter "System Power-on Without Hard Disk". Important: Please keep in mind that this process will format your SMCNAS02 and all data will be lost. [. . . ]