User manual SINGER MC3223
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SINGER MC3223. We hope that this SINGER MC3223 user guide will be useful to you.
Manual abstract: user guide SINGER MC3223
Detailed instructions for use are in the User's Guide.
[. . . ] Switch the sewing machine off ("O") when making any adjustments in the needle area, such as threading needle, changing needle, threading bobbin, or changing presser foot, and the like. Always unplug sewing machine from the electrical outlet when removing covers, lubricating, or when making any other user servicing adjustments mentioned in the instruction manual. Do not operate where aerosol spray products are being used or where oxygen is being administered. To disconnect, turn all controls to the off ("O") position, then remove plug from outlet. [. . . ] For small thread spools, place small side of spool holder next to spool. (2) - Draw thread from spool through the upper thread guide (3) and pulling thread through pre-tension spring as illustrated. (4) - Thread tension module by leading thread down right channel and up left channel. (5) During this process it is helpful to hold the thread between the spool and thread guide. - At the top of this movement pass thread from right to left through the slotted eye of the take-up lever and then downwards again. (6) - Now pass thread behind the thin wire needle clamp guide (7) and then down to the needle which should be threaded from front to back. (8)
18
EN Raising the Bobbin Thread
Hold the upper thread with the left hand. Turn the handwheel (1) towards you (counterclockwise) lowering, then raising needle. Note: If it is difficult to raise the bobbin thread, check to make sure the thread is not trapped by the hinged cover or the removable accessory storage. 1
Gently pull on the upper thread to bring the bobbin thread up through the needle plate hole. (3)
20
EN How to Choose Your Pattern
To select a stitch, simply turn the pattern selector dial. For straight stitch, select pattern " " or " " with the pattern selector dial. For zigzag stitch, select pattern " " with the pattern selector dial. Adjust the stitch length and stitch width according to the fabric being used. To obtain the other patterns, turn the stitch length dial to "S1" or "S2", select the pattern desired with pattern selector dial, and adjust the stitch width with the stitch width dial. Cadran de sélection de motifs
EN Stitch Width Dial & Stitch Length Dial
Function of stitch width dial (Model 3229) The maximum zigzag stitch width for zigzag stitching is 5mm; however, the width can be reduced on any patterns. The width increases as you move zigzag dial from "0" - "5". (1) The stitch width dial is also the control for the straight stitch infinite needle position. "0" is center needle position , "5" is full right. Function of stitch length dial while zig-zag stitching Set the pattern selector dial to " ". (3) Function of stitch length dial for when straight stitching For straight stitch sewing, turn the pattern selector dial to the straight stitch setting. Turn the stitch length dial, and the length of the individual stitches will decrease as the dial approached "0". [. . . ] if a shank is required , place a darning needle on top of the button and sew. (4) For buttons with 4 holes, sew through the front two holes first, push the work forward and then sew through the back two holes. 38
EN Installing the Removable Accessory Storage
Hold the removable accessory storage horizontally, and push it in the direction of the arrow. 1
The standard accessories are contained inside the removable accessory storage compartment. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SINGER MC3223
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SINGER MC3223 will begin.