User manual SINGER CONFIDENCE 7465

[. . . ] Do not expose yourself directly to cold air for a long period to avoid excess cooling. CAUTION The instructions to be followed are classified by the following symbols: This symbol denotes an action that is PROHIBITED. Indoor unit Power supply Air inlet Air outlet Remote control Remote control Do not allow infants and small children to play with the remote control to prevent them from accidentally swallowing the batteries. air inlet Air outlet Power supply Do not use a modified cord , joint cord , extension cord or unspecified cord to prevent overheating and fire. [. . . ] The wires in this mains lead are coloured in accordance with the following code: Terminals Red Black Green/Yellow Indoor unit and outdoor unit Do not wash the indoor unit with water, benzine, thinner or scouring powder to avoid damage or corrosion at the unit. Do not use for preservation of precise equipment, food, animals, plants, artwork or other objects. Do not use any combustible equipment in front of the airflow outlet to avoid fire propagation. do not expose plants or pet directly to airflow to avoid injury , etc. Do not install the unit in oily and smoky areas to prevent damage to the unit. Do not step onto an unstable bench when cleaning the unit to avoid injury. Do not open window or door for long time during COOL/DRY mode operation. Prevent water leakage by ensuring drainage pipe is: - Connected properly, - Kept clear of gutters and containers, or - Not immersed in water After a long period of use or use with any combustible equipment, aerate the room regularly. After a long period of use, make sure the installation rack does not deteriorate to prevent the unit from falling down. Wires live neutral earth colours (IEC Standard) brown blue green-yellow Wiring colour may vary depending on a country wiring code’s standard. Prevent electric shock by switching off the power supply and unplug: - Before cleaning or servicing, - When extended non-use, or - During abnormally strong lightning activity. When the outdoor temperature is below -10°C and you use this model out of above conditions, the outdoor unit might be frozen up and stop operation for protection control. Indd 7 2012-11-7 15:20:08 English How to use To select operation mode To set the timer 7 Cleaning instructions To ensure optimal performance of the unit, cleaning has to be carried out at regular intervals. Air filters Indoor unit Front panel Aluminium fin Anti-bacterial filter Wipe the unit gently with a soft, dry cloth. Remove the front panel 2 Pull out Front panel Clean the filter regularly • Wash/rinse the filters gently with water to avoid damage to the filter surface. € Dry the filters thoroughly under shade, away from fire or direct sunlight. Remove air filter Attach air filter Air filters Insert into the unit 1 Raise Close it securely 3 Press both ends of the front panel 1 Insert at both sides Vacuum • Remove the Anti-bacterial filter from front grille and vacuum the filter whenever necessary. For seasonal inspection after extended non-use • Checking of remote control batteries. After 15 minutes of operation, it is normal to have the following temperature difference between air inlet and air outlet vents: Cooling: ≥ 8°C Heating: ≥ 14°C For extended non-use • Turn off the power supply and unplug. Indd 8 2012-11-8 16:38:30 The following symptoms do not indicate malfunction. € This may due to damp smell emitted by the wall, carpet, furniture or clothing. Indoor fan stops occasionally during automatic • This helps to remove the surrounding odours. [. . . ] € Changes of temperature cause the expansion/ contraction of the unit. Symptom Check Operation in COOL/HEAT mode is not working • Set the temperature correctly. The unit does not receive the signal from the • Make sure the receiver is not obstructed. NON SERVICEABLE CRITERIAS TURN OFF POWER SUPPLY AND UNPLUG then please consult authorised dealer under the following conditions: • Abnormal noise during operation. [. . . ]