User manual SINGER 81K24

[. . . ] 13) Learn to get to know the parts which make up your dishwasher, you will use it better for it. This is where you will find the description of the controls and the internal parts. 14) This page includes useful tips to help you load your dishwasher correctly and make the most of all the available space. Useful information After loading the dishes, you need to select the right wash cycle and Read this chapter carefully, as it will provide you with nasty surprises. [. . . ] In any case, please read the manufacturer's instructions on the packet. If you use only these products, it is normal for the salt and rinse aid indicator lights to flash permanently after a certain number of cycles. 16 ARISTON DISHWASHER - Instructions for installation and use D 1509)50-4 Select the right wash cycle A wash cycle for every degree of soil Dishwasher washing guarantees your dishes will be cleaned in a hygienic setting for safer, cleaner results. Salt, rinse aid, the right amount of detergent and the correct wash cycle: this is the formula to get the best results and to keep your dishwasher in shape. If the crockery is only lightly soiled or if it has been rinsed with water before being placed in the dishwasher, reduce the amount of detergent used accordingly. Selecting the most suitable wash cycle for the load ensures clean dishes and a more convenient use of water and electricity. Pre-wash with hot water at 40°C Very dirty dishes and pans Wash at 63°C. (not to be used for 2 Rinses with cold water delicate items) Rinse with hot water at 67°C. Cold pre-wash Wash at 48°C Cold rinse Hot rinse at 60°C Drying 3+24 g * 2:00' Cycle for normally dirty pans and dishes. 27 g * 1:33' Daily Wash Environmentally-friendly cycle, with low energy consumption levels, suitable for normally dirty pans and dishes. 3+24 g * 2:25' Rapid & Dry Economic and fast cycle to Short wash at 48°C be used for slightly dirty Hot rinse at 67°C dishes. If the water pipes are new or have not been used for an extended period of time, let the water run to make sure that the water is clear and free of impurities. If this precaution is not taken, there is a risk that the water inlet can get blocked and damage the appliance. -It is strongly recommended to use a new hose to connect the dishwasher to the water supply line, and the old hose-set should not be reused. Asking to specilized shop or an authorized Anti-flooding protection Your dishwasher (model LV 460A) is provided with a special system which blocks the water supply in the event of leaks inside the appliance. It is further equipped with a water inlet hose (“WATER STOP”) that can withstand extremely high pressures and that turns bright red in the event of breakage. Safety in the event of flooding is ensured by the second clear hose that contains the former and thus highlights the latter when it has turned bright red. It is vital that you check it on a regular basis: if you see it has turned bright red, then you know you have to replace it as soon as possible. Only now can you plug the appliance into a socket provided with an efficient earth connection (the system's earthing is a guarantee of safety provided for by law, make sure your system has it). It should be stuck onto the lower side of your wooden worktop to protect it from the formation of condensation. When not provided, this tape can be requested as a spare part from authorised retailers. First of all, check that the mains voltage and frequency values correspond to those stated on the rating plate located on the stainless steel inner door of the appliance and that the electrical system to which the dishwasher is connected is sized for the maximum current indicated on said rating plate. [. . . ] 20 ARISTON DISHWASHER - Instructions for installation and use Cleaning and special maintenance The filter assembly If you want consistent good results from your dishwasher, you need to clean the filter assembly. The food particles are removed from the wash water, allowing it to be recirculated during the cycle, filtered perfectly. For this reason, it is a good idea to remove the larger food particles trapped inside the cup “C” and the semicircular filter A after each wash; pull the cup handle upwards to remove them. The entire filter assembly should be cleaned thoroughly once a month: cup C + semi-circular filter A + cylindrical filter B. [. . . ]