User manual SILVERCREST SSW 1100 A1 ELECTRIC HOT TRAY

[. . . ] This appliance is NOT intended for use in commercial or industrial applications or for use outdoors. To avoid unnecessary risks, in the event of damage to the plug and/or the power cable arrange for it/them to be exchanged as soon as possible. â· Additionally, NEVER position the appliance below inflammable objects, especially not below curtains, drapes or hanging cupboards. [. . . ] In this case, immediately remove the plug from the wall socket and arrange for the appliance to be repaired. As soon as the appliance has reached its highest temperature the control lamp "Ready for use" 7 glows. First remove the plug from the wall power socket and then the plug from the connection socket 3 on the appliance. The appliance is now independant from mains power and retains its heat for approx. Remove all packaging materials from the appliance and then clean it as described in the chapter "Cleaning and Care". Take hold of the food warmer ONLY by means of the grips 4 provided on it. â· Place the food warmer at the place where you wish to use it. You can also leave the appliance connected to mains power after it has been warmed up. It could then happen that, during use, the control lamp "Ready for use" 7 briefly extinguishes itself and then glows once again. This indicates that the set temperature had fallen and the appliance had warmed itself back up. On the first usage, a slight odour can occur (minimal smoke development is also possible). First insert the plug of the power cable 2 into the connection socket 3 and then connect the power cable 2 with a wall power socket. The hotplate 1 can, if required, be cleaned with a special stainless steel cleaning agent. â· Wipe off any possibly remaining cleaning agent residues with a damp cloth. [. . . ] This product is for private use only and is not intended for commercial use. The warranty is void in the case of abusive and improper handling, use of force and internal tampering not carried out by our authorized service branch. The warranty period will not be extended by repairs made under warranty. [. . . ]