User manual SILVERCREST SSM 550 A1 BLENDER

[. . . ] Should you do so, pieces of the foodstuff could be thrown out at high speeds! Do not insert cutlery items or mixing tools into the mixing jug when the appliance is in use. There is a considerable risk of injury should these make contact with the swiftly rotating cutters! In order to be able to react immediately in the event of danger, always have the appliance under supervision when it is in use. [. . . ] notice Fill the mixer attachment e with a maximum of 180 g of ice cubes. If filled with more than this, the appliance cannot optimally crush them. Filling and mounting the mixer jug ake the mixer attachment e from the motor unit u and remove the lid w. Fill the mixer attachment e and then press the lid w firmly back onto the mixer attachment e. ensure that the pourer nose on the mixer attachment e is also closed. Insert the filling cap q into the lid opening and secure it by turning it clockwise. Filling when in use Should you wish to insert further foodstuffs during operation, you may ONLY open the filling cap q provided for this purpose. Do not insert cutlery items or mixing tools into the mixing jug e when the appliance is in use. There is a considerable risk of injury should these make contact with the swiftly rotating cutters r!Afterwards, replace the filling cap q into the lid and secure it by turning it clockwise. When the processing of the foodstuffs is complete: Always first place the switch t into the OFF position ("0") and remove the power plug. Wait until the motor has come to a complete standstill before lifting the mixer jug e straight up. Before starting to clean the liquidiser and its components: · Ensure that the motor is switched off and the power plug removed from the socket. Under no circumstance may the motor block u be submersed in water or other fluids. This could result in you receiving a fatal electric shock and the appliance could be damaged. Never disassemble the cutters r and never reach into the mixer jug e. Do not use solvents or abrasive cleaners on the plastic surfaces, they could be damaged by them. ­ The best results when blending firm ingredients are achieved by placing small portions one after the other into the mixer jug e instead of inserting a single large portion. ­ When processing firm ingredients, cut them into small pieces (2-3 cm). ­ When mixing liquid ingredients begin first of all with a small measure of fluids. ­ The appliance can be stabilised by placing your hand on top of the closed liquidiser during operation. ­ For the stirring of firm or very viscous foodstuffs it can be beneficial to use the impulse-operation, which helps avoid a blocking of the cutters r. [. . . ] The appliance has been manufactured with care and meticulously examined before delivery. In the event of a warranty claim, please make contact by telephone with our Service Department. The warranty covers only claims for material and maufacturing defects, but not for transport damage, for wearing parts or for damage to fragile components, e. This product is for private use only and is not intended for commercial use. [. . . ]