User manual SILVERCREST SND 3600 A1 SLIDE AND NEGATIVE SCANNER

[. . . ] This device is intended exclusively for the non-commercial use of scanning and digitizing film negatives and slides. This device is not intended for any other use or for uses beyond those mentioned. Danger can come from the device if used for unintended purposes and/or other types of use. Claims of any kind for damage resulting from unintended use will not be excepted. [. . . ] NOTICE If possible preserve the device's original packaging during the warranty period so that in the case of a warranty claim you can package the device properly for return. For safe and faultless operation of the device the set-up location must fulfill the following provisions: The device must be placed on a firm, flat and level surface. Do not place the device in a hot, wet or very damp environment or in the vicinity of flammable materials. System prerequisites You will need a computer with a vacant USB port and with the operating system Windows® XP, Windows® Vista or Windows® 7 from the Microsoft® corporation. Installation of the ArcSoft MediaImpression 2 programme NOTICE In these operating instructions only the programme sections are described that you will need for scanning your slides and/or film negatives. You can find further information in the programme's on-line help. the illustrations and descriptions refer to the operating system Microsoft® Windows® 7. The illustration depictions can differ, depending on the display settings, with other operating systems. NOTICE If you have switched off the autostart function and the installation process does not begin automatically you can start the installation process by double clicking on the file "autorun. In this chapter you receive important information for the handling and operation of the device. Release the fastener on the front of the film holder 5 and open the holder. Release the fastener on the front of the slide holder 6 and open the holder. insert a maximum of 3 framed slides , correctly orientated , into the holder. Image editing tools: Detailed image editing NOTICE In these operating instructions only the programme sections are described that you will need for scanning your slides and/or film negatives. When the programme is first started after the installation a calibration and data collection process takes place. Make sure that no slide or negative holders are inserted into the device. The first calibration and data collection process can take several minutes. After completion of the calibration the programme window will be displayed. Carry out the necessary settings: File format, quality (only with JPG files), memory location, film type, colour depth, scan resolution NOTICE The colour depth is defined as 24 Bit. A scan with 1600 DPI has a resolution of 2520 x 1680 Pixel and a scan with 3600 DPI has a resolution of 5040 x 3360 Pixel. GB IE Slide the holder with the negatives and/or slides to be scanned into the slot 3 on the device until it locks into place. NOTICE A holder that has been inserted into the device cannot be pulled out again, it has to be pushed completely through the device. [. . . ] This device has been manufactured with care and meticulously examined before delivery. In the case of a warranty claim, please get in touch, by telephone, with our service department. NOTICE The warranty is valid only for material or manufacturing defects and not for transportation damage, wear and tear or for damages to breakable parts such as switches or power packs. This product is for private use only and is not intended for commercial applications. [. . . ]