User manual SILVERCREST SKRP 1000 A1 UNDERCUPBOARD RADIO

[. . . ] Intended Use Items supplied Technical data Safety instructions The appliance components Setting up the appliance Fixing the kitchen radio beneath a wall cabinet Setting up the kitchen radio The Settings menu Further setting possibilities Radio operation Cleaning Disposal CE Conformity Importer Warranty and Service Read the operating instructions carefully before using the appliance for the first time and preserve this booklet for later reference. Pass this booklet on to whoever might acquire the appliance at a future date. This Kitchen Radio is intended for use either free-standing or for assembly beneath a wall cabinet. The intended uses for this Kitchen Radio are the reception of FM radio transmissions and as an alarm/timer, using either signal tones or the radio itself. [. . . ] Pressing and holding the buttons changes the date at intervals of 10 days. /AMS o and then use the buttons UP /DOWN 1(/l to set the hour at which the alarm of the reminder function should sound. When you press the button TIMER s, the year number is deactivated and thus you are reminded on this date every year. To deactivate the memory function, programme in a date that lies in the past. Press the button MODE/LOCK k once again to save the settings of the memory function and to switch to setting the update function. Setting the update function Using this function, the appliance can automatically update the settings for the clock based on the RDS data. When the radio is not switched on, this update takes place daily at 3:00 and 5:00. Press the button MODE/LOCK k once again to save the settings of the update function and to switch to setting the 12 or 24 hour mode. In the 12 hour mode "AM" appears between 0:00 and 11:59 (ante meridiem = mornings) behind the time display, from 12:00 to 23:59 "PM" (post meridiem = afternoons) is shown in the display r. Press the button MODE/LOCK k to save the menu settings and to close it down. Setting the display brightness Press the button LIGHT/DIMMER j repeatedly to set the brightness level at which the display should be illuminated. Illuminated clamp strip Documents, for example recipes, with a width of up to 10 cm can be inserted and automatically held in the clamp strip d. If you press and hold the button LIGHT/DIMMER j for two seconds, the downward facing lamp is switched on, which then illuminates the recipe. Press and hold the button j once again for two seconds to switch the lamp off. Using the buttons UP/DOWN 1(/l, set the desired time interval (a time span between 1 minute and 23:59 h is possible). Pressing and holding one of the buttons changes the display in ten-minute intervals. Or press one of the buttons M1­M4 t­i to recall a saved preset time for the kitchen timer. From 30 seconds before expiry of the time span an acoustic signal sounds, repeating at shorter intervals the closer the set time approaches. When the time has expired, the alarm sounds continuously and with increasing volume. Press any button to stop the alarm, even if the button lock is switched on . To interrupt the kitchen timer, switch to the kitchen timer mode by pressing the button TIMER s. Then briefly press the button TIMER s to interrupt the kitchen timer. [. . . ] Ensure that moisture cannot permeate into the appliance during cleaning!This product is subject to the provisions of European Directive 2002/96/EC. disposing of the appliance · Arrange for the product, or parts of it, to be disposed of by a professional disposal company or by your communal waste facility. disposal of batteries/accumulators · Used batteries/rechargeable batteries may not be disposed of in household waste. [. . . ]