User manual SILVERCREST SKM 550 A1

[. . . ] · Take care with their installation and removal, as well as when cleaning them!· Attention: When the machine is running, only insert into the mixing bowl, food processor or the mixer the ingredients to be processed. · To avoid personal injury and damage to the appliance, NEVER insert or place your hands or foreign objects into the loading shaft or in the mixer. · Only exchange accessories when the drive has come to a complete standstill. [. . . ] · Press the unlocking button f down and bring the swivel arm h into operating position 5 (see chapter "Operating positions"). On task completion · Turn the appliance off with the rotary switch g. · Turn the rotary switch g to P and hold it firmly until the drive motor j comes to a standstill (Fig. · Press the unlocking button f down and raise the swivel arm h a little. · Press the unlocking button f down and bring the swivel arm h into operating position 4 (see chapter "Operating positions"). · Remove the accessories from the drive motor j. · Remove the mixing bowl y. · Clean all parts (see chapter "Cleaning and care"). Working with the food processor Note: Ensure that on the swivel arm h neither the kneading hooks q, the whisk e nor the mixing beater w are attached. Proceed as follows to prepare the appliance for operation with the food processor u: · Press the unlocking button f down and bring the swivel arm h into operating position 4 (see chapter "Operating positions") (Fig ). The base of the mixing bowl y must engage in the recesses k on the appliance. · Press the unlocking button f down and bring the swivel arm h into operating position 1 (see chapter "Operating positions"). · Remove the drive protection lid for the food processor u (Fig. · Insert the food processor u into the drive opening (The "dot" marking on the food processor u to the "arrow" marking on the swivel arm h) and then turn it clockwise as far as it will go (The "lock" marking on the food processor onto the "arrow" marking on the swivel arm h). · Depending on the task to be performed, place the cutting s, rasping o or rubbing i disc onto the drive shaft a of the food processor. · Place the lid with stodger d onto the food processor u and latch it down. Take note of the table in the chapter , , Recommended filling quantities". · Insert ingredients through the loading shaft with the stodger d. -5- Risk of injury from rotating parts!To avoid personal injury and damage to the appliance, NEVER insert or place your hands or foreign objects into the loading shaft. After being switched off, the drive motor j continues to run for a short time. The appliance may only be used when the drive openings not being utilised are covered with drive protection lids. In cases of malfunction switch the appliance off and remove the plug from the wall socket, this will avoid an unintentional switching-on of the appliance. [. . . ] This product is for private use only and is not intended for commercial use. The warranty is void in the case of abusive and improper handling, use of force and internal tampering not carried out by our authorized service branch. The warranty period will not be extended by repairs made under warranty. Any damage and defects extant on purchase must be reported immediately after unpacking the appliance, at the latest, two days after the purchase date. [. . . ]