User manual SILVERCREST SKE 3.6 A1 ELECTRIC CORKSCREW

[. . . ] IMPORTANT A warning of this danger level signifies possible property damage. This corkscrew is not suitable for removing/opening other types of closures on bottles, such as crown caps or screw caps. This appliance is not intended for any other use or for uses beyond those mentioned. Risk can come from the appliance if used for unintended purposes and/or other types of use. [. . . ] A repair to the appliance during the warranty period may only be carried out by a customer service department authorized by the manufacturer otherwise no additional warranty claims can be considered for subsequent damages. The appliance is delivered with the following components as standard: Corkscrew Charging station Charge Supply Device Foil cutter Operating instructions NOTICE Check the contents to make sure everything is there and for visible damage. If the contents are incomplete, or are damaged due to defective packaging or transportation, contact the Service Hotline. The packaging materials are selected from the point of view of their environmental friendliness and disposal technology and are therefore recyclable. the recirculation of packaging into the material circuit saves on raw material and reduces generated waste. Dispose of packaging material that is no longer needed according to the regionally established regulations. NOTICE If possible preserve the appliance's original packaging during the warranty period so that in the case of a warranty claim you can package the appliance properly for return. If you do, moisture could penetrate into the corkscrew or the charger 8. 5) Insert the charge supply device 6 to the charging station 8 into a mains power socket. 6) The corkscrew contains batteries that have to be recharged via the charger 8. NOTICE When inserting the corkscrew into the charging station 8, it must . ­ have its opening facing down, ­ have the arrow on the corkscrew pointing to the marker line on the charging station 8. Firmly take hold of the bottle with one hand so that it cannot fall over. You may have to repeat this several times before you can remove the capsule of the film collar. 5) Firmly take hold of the bottle with one hand so that it cannot fall over. Press it firmly until the spiral penetrates perceptibly into the cork. The spiral is screwed into the cork and then pulls it out of the bottle neck. Continue to keep the wine bottle and the corkscrew gripped firmly while doing this. 7) First release the lower button 2 when the cork has been completely removed from the bottle neck. WARNING - RISK OF INJURY Ensure that no liquids can permeate into the corkscrew/the charger 8 when it is in use. 8) Take the corkscrew from the bottle and hold it with the opening down. 9) Release the upper button 1 as soon as the cork falls off of the corkscrew. [. . . ] This appliance has been manufactured with care and meticulously examined before delivery. In the case of a warranty claim, please make contact by telephone with our service department. The warranty is valid only for material or manufacturing defects not, however, for transport damage, wear and tear or for damage to breakable parts, i. This product is for private use only and is not intended for commercial applications. [. . . ]