User manual SILVERCREST SKAT 1000 A1

[. . . ] Remove the filter bag first when the coffee has drained away and it has cooled down. ⷠNever move/transport the appliance during the brewing process. ⷠRemove the thermos jug r first when the brewing process is complete and the filter has fully drained itself. [. . . ] With the button , , prog" h you can programme the Coffee Maker so that it starts the brewing process at a predetermined time. Always first insert coffee powder into the filter bag in the filter holder y and water into the water tank w. Make sure the thermos jug r is empty and the water tank w is not filled beyond the max-marking (10 cups) before every use. Enter in the desired start time with the buttons "h" j and "min" u (see chapter "Setting the timer"). ⷠWhen the desired time has been entered, release the button "prog" h. ⷠPress the button "auto" i until the green indicator s lights up. To clean the lid of the thermos jug r first disassemble the lid (See Fig. ): · Carefully pull off the silicone disc from the valve at the underside of the lid. When doing this, hold the valve, because it is pressed up by a spring from the other side. ⷠClean all parts with a mild soapy solution and wipe them off well. Always remove the plug from the power socket before cleaning the appliance. Before you clean the Coffee Maker, you must remove the power plug from the power socket. Do not let the thermos jug with lid lie in soapy water and do not wash the parts in the dishwasher, as they could become leaky!If you do not use the Coffee Maker for an extended period, store the power cable in the cable storage compartment t (Fig. [. . . ] The appliance has been manufactured with care and meticulously examined before delivery. In the event of a warranty claim, please make contact by telephone with our Service Department. The warranty covers only claims for material and manufacturing defects, but not for transport damage, for wearing parts or for damage to fragile components, e. [. . . ]