User manual SILVERCREST SIKP 2000 A1 INDUCTION HOB

[. . . ] Do not place any metallic objects on the induction area, such as kitchen utensils or pieces of cutlery. This appliance is not intended for use by individuals (including children) with restricted physical, physiological or intellectual abilities or deficiences in experience and/or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the appliance is to be used. Children should be supervised to ensure that they do not play with the appliance. Be careful when heating small volumes of cooking oils ­ do not select a high power level. [. . . ] 5 Raise or reduce the setting for the power level or the elapsed time (Timer) 6 Button - Power Setting For setting the power level (L1-L10) 7 Button - Timer For setting elapsed times of up to 180 mins for automatic switch off 8 Control lamp 9 On/Off button Switch the hob on or off, cancel the function 0 Power cable with power plug Suitable are pots and pans with a base made of steel or cast iron. These are recognisable either through the markings on the pan or if a magnet clings to the base of the pan. Unsuitable are all types of cookware made of metals to which a magnet does not cling, for example aluminium, copper and stainless steel, as well as those made of porcelain, glass, ceramics and plastics etc. Thin pan bottoms are better suited for induction cookers than thick sandwich bottoms. The very short reaction times to setting adjustments (short pre-warm time; fast metered roasting) are not possible with thick pan bases. May not exceed 26 cm, so that the pan does not overhang, · And may not be less than 16 cm, so that the energy field can actually work. The base of the pan may not be uneven, rather, it must sit flat and squarely. Therefore, place it only on firm and smooth surfaces, not on textiles or fluffy surfaces, such as tablecloths. Do not place it adjacent to curtains, drapes or other textiles that, due to the airflow, could press themselves against the appliance. Preserve the packaging so as to be able to store the appliance under protection or to transmit it through the post, e. When you have unpacked and positioned the appliance as described above, it is now ready for use. When cookware with content is standing on the hob 1: · Insert the plug 0 into the mains power socket. A signal sounds, the control lamp 8 lights up and "- L -" appears in the display 2. If, within 30 seconds of switching on, you do not select any further function, · If you activate the button On/Off 9 once again, also when it is in actual use. In standby mode, that is, after switching off or before switching on, indicated in the display 2 are either "- L" or "- H -". These heat indicators mean: "- L -" = "Low" - the hob temperature is < 50°C or "- H -" = "High" - the hob temperature is > 50°C For safety reasons, the cookware recognition feature switches the appliance off automatically when you . Remove the cooking vessel from the hob for longer than 15 seconds, or do not place one there. Although the energy field is immediately switched off with short cookware removals, the selected function remains active. Around every 3 seconds a signal tone issues a reminder that in roughly 15 seconds the appliance will switch itself off automatically. The hob 1 also switches itself off after 120 minutes of continuous use should you not have entered in any new settings in the meantime. With the button 5 you can now set the desired elapse time period from 1. When you have set the desired time period and do not press any other buttons, the countdown starts automatically and the programmed power level appears in the display 2. [. . . ] This product is for private use only and is not intended for commercial use. The warranty is void in the case of abusive and improper handling, use of force and internal tampering not carried out by our authorized service branch. The warranty period will not be extended by repairs made under warranty. Any damage and defects extant on purchase must be reported immediately after unpacking the appliance, at the latest, two days after the purchase date. [. . . ]