User manual SILVERCREST SEAS 60 A1 ELECTRIC ALL-PURPOSE SHARPENER

[. . . ] The manufacturer assumes no responsibility for damage caused by failure to observe the instructions, improper use, inappropriate repairs, making unauthorized changes or for using unapproved replacement parts. In these specific operation instructions the following warning notices are used: DANGER A warning at this risk level indicates a threateningly dangerous situation. If the dangerous situation is not avoided it can lead to death or serious injuries. [. . . ] Ensure that the plug is at all times easily accessible, so that it can be quickly removed in the event of potential danger or risk. Wear safety goggles to protect your eyes from flying abrasive particles or any sparks that may be generated. Take steps to ensure that the hair of the head, loose clothing and parts of the body do not come into contact with the revolving grindstone. 1 Grinder openings for knives with a smooth edge 2 Grinder openings for a flat-head screwdriver 3 Grinder opening for a scissor edge 4 ON/OFF button 5 Dust drawer The appliance is delivered with the following components as standard: Electric All-Purpose Sharpener Operating instructions Extract the appliance and the operating instructions from the carton and remove all packing materials. nOTE Check the contents to ensure everything is available and for visible damage. If the contents are incomplete, or are damaged due to defective packaging or transportation, contact the Service Hotline (see chapter Warranty and Service). 2) Guide the power cable through the clamp and the recess on the side of the case. 3) Place the appliance on a firm , flat , non-slip and level surface. This must be easily accessible, so that the plug can be quickly removed in the event of an emergency. Contact with live wires or components may result in a potentially fatal electrical shock!Pay heed to the following safety precautions to avoid the risk of receiving an electric shock: Ensure that the power cable is not damaged and that it is not running over hot surfaces and/or sharp edges. IMPORTANT Before you connect the appliance, compare the connection data (voltage and frequency) on the appliance plate with that of your electrical power supply. 1) Select the appropriate grinder opening for the knife 1/ the scissors 3/the screwdriver 2. The grinding stone rotates continuously until you release the On/ Off button 4. 3) When the grinding wheel is rotating, follow the steps as described in the individual chapter for the object being sharpened. Always draw the knife or scissors back in an even movement from the blade stop, not in a repetitive back and forth movement ­ otherwise the result will be an uneven sharpening. Do not apply excess pressure and always sharpen only clean blades, so as to avoid a premature wearing-out of the grindstone. always sharpen knives and scissors so that the blade is at an acute angle to the grindstone (as alluded to in the shape of the opening). [. . . ] In the case of a warranty claim, please make contact by telephone with our service department. NOTE The warranty covers only claims for material and maufacturing defects, not for transport damages, worn parts or for damage to fragile components, e. This product is for domestic use only and is not intended for commercial applications. [. . . ]