User manual SILVERCREST SDG 800 A1 STEAMER
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SILVERCREST SDG 800 A1 STEAMER. We hope that this SILVERCREST SDG 800 A1 STEAMER user guide will be useful to you.
You may also download the following manuals related to this product:
SILVERCREST SDG 800 A1 STEAMER (1727 ko)
SILVERCREST SDG 800 A1 STEAMER (1806 ko)
SILVERCREST SDG 800 A1 STEAMER (1271 ko)
SILVERCREST SDG 800 A1 STEAMER (1727 ko)
SILVERCREST SDG 800 A1 STEAMER (1806 ko)
SILVERCREST SDG 800 A1 STEAMER (1806 ko)
SILVERCREST SDG 800 A1 STEAMER (1727 ko)
SILVERCREST SDG 800 A1 STEAMER (1271 ko)
SILVERCREST SDG 800 A1 STEAMER (1271 ko)
Manual abstract: user guide SILVERCREST SDG 800 A1 STEAMER
Detailed instructions for use are in the User's Guide.
[. . . ] Never leave children unsupervised with the packing material and the product. There is the hazard of choking by packing material and the hazard of life by burns. J hildren and persons, not having the knowledge C or experience in operating the appliance or having handicaps of physical, sensorial or mental nature must not operate the appliance without supervision or instruction by a person, responsible for their safety. Children must be supervised in order to ensure that they do not play with the appliance. [. . . ] j f the set steaming time is elapsed , the appliI ance will automatically switch back to the keep-warm mode (see "keep-warm mode"). Note: You can increase the steaming time at any time in 5-minute steps or decrease it in 1-minute steps by pressing the PLUS / MINUS button 16. As soon as the steaming time is set manually to "0", the device switches automatically into the warm mode (see "Warm mode"). Always lift the cover 1 slowly, turning away from you and let the steam exhaust backwards. Use oven cloths when touching the cover 1 and the steam trays 3 , 4 , 6 . Note: Consider that the base of the appliance / water tank 10 has to be filled with water at least up to the MIN mark 9 . The indicator on the LCD-display 13 switches back to the time indicator 20 again (see fig. Note: If the supply of water is used up during use, a signal tone will sound. The indicator on the LCD-display 13 switches back to the time indicator 20 again (see fig. Therefore, regularly check the water level on the water level indicator 12 and replenish sufficient water in good time!Note: Consider that the base of the appliance / water tank 10 has to be filled with water at least up to the MIN mark 9 . Ensure that the turbo ring 8 as well as the condensate collection basin 7 are positioned correctly. That means if you set a delay time of 30 minutes at 13:00, the steaming process will start at 13:30. Note: Be aware that you might have to replenish water when the steaming time is longer. Beware of getting in contact with the ascending steam or any components. Note: The device starts to beep as soon as the water in the reservoir is exhausted. Check the water level in the reservoir regularly by referring to the water level indicator 12 and add more water in good time. - The water is heated repeatedly in cycles in the warm mode to keep the food warm at a temperature of approx. Beware of getting in contact with the ascending steam or any components. - The keep-warm mode will remain active until the supply of water is used up or you press a button. J lease note that the steaming times in the upP per 3 and middle steam tray 4 increase by 5 10 minutes. Let the lower steam tray 6 empty if you want to prepare food with longer steaming time first. [. . . ] HaZarD OF InJUrY Always switch the appliance off and pull the mains plug 18 prior to all occupations with the appliance. The warranty is void in the case of abusive and improper handling, use of force and internal tampering not carried out by our authorized service branch. The warranty period will not be extended by repairs made unter warranty. Any damage and defects extant on purchase must be reported immediately after unpacking the appliance, at the latest, two days after the purchase date. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SILVERCREST SDG 800 A1 STEAMER
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SILVERCREST SDG 800 A1 STEAMER will begin.