User manual SILVERCREST KH 701

[. . . ] · Caution: the cutting and rasping discs and the mixing knives are very sharp!· Take care with their installation and removal, as well as when cleaning them!· Attention: When the machine is running, only insert into the mixing bowl, food processor or the mixer the ingredients to be processed. · To avoid personal injury and damage to the appliance, NEVER insert or place your hands or foreign objects into the loading shaft or in the mixer. [. . . ] · Set the rotary switch g to the desired level. -4- Risk of injury from rotating parts!After being switched off, the drive motor j continues to run for a short time. The appliance may only be used when the drive openings not being utilised are covered with drive protection lids. In cases of malfunction switch the appliance off and remove the plug from the wall socket, this will avoid an unintentional switching-on of the appliance. Refilling with ingredients · Turn the appliance off with the rotary switch g. · Turn the rotary switch g to P and hold it firmly until the drive motor j comes to a standstill (Fig. · Press the unlocking button f and bring the swivel arm h into operating position 5 (see chapter , , Operating positions"). · Refill with ingredients or insert the ingredients through the refill opening in the lid. On task completion · Turn the appliance off with the rotary switch g. · Turn the rotary switch g to P and hold it firmly until the drive motor j comes to a standstill (Fig. · Press the unlocking button f and bring the swivel arm h into operating position 4 (see chapter , , Operating positions"). · Clean all parts (see chapter , , Cleaning and care"). Working with the food processor Note: Ensure that on the swivel arm h neither the kneading hooks q, the whisk e nor the mixing beater w are attached. Proceed as follows to prepare the appliance for operation with the food processor u: · Press the unlocking button f and bring the swivel arm h into operating position 4 (see chapter , , Operating positions") (Fig. The base of the mixing bowl y must engage in the recesses k on the appliance. · Press the unlocking button f and bring the swivel arm h into operating position 1 (see chapter , , Operating positions"). · Remove the drive protection lid for the food processor u (Fig. · Insert the food processor u with the drive shaft a into the drive opening (The marking on the food processor u to the marking on the swivel arm h) and turn it clockwise as far as it will go. · Depending on the task to be performed, place the cutting s, rasping o or rubbing i disc onto the drive shaft a of the food processor. · Place the lid with stodger d on the food processor u and latch it down. Take note of the table in the chapter , , Recommended filling quantities". · Insert ingredients through the loading shaft with the stodger d. -5- Risk of injury from rotating parts!To avoid personal injury and damage to the appliance, NEVER insert or place your hands or foreign objects into the loading shaft. [. . . ] Should a claim need to be made under the warranty, please make contact by telephone with our service department. The warranty covers ONLY claims for material and maufacturing defects, not for wearing or consumable or for damage to fragile components. This product is for private use only and is not intended for commercial applications. The warranty will become void in the event of abusive and improper handling, use of force and internal tampering not carried or approved by our authorized service branch. [. . . ]