User manual SILVERCREST KH 311

[. . . ] · Always remove the plug from the wall socket when you attach accessories, in the case of malfunctions, before cleaning the appliance and when it is no longer required for use. Should liquids nonetheless permeate into the appliance housing, immediately remove the plug from the wall socket. DO NOT use the appliance in the bath, in the vicinity of water-filled baths, swimming pools or washbasins. · NEVER grasp the appliance, power cable or power plug with wet hands. [. . . ] With vibration switched on in the massage head 1, a relaxing and pain relieving effect can be achieved for tired muscles through gentle massage. The grip 7 can be turned in five levels over a radius of 90°. · For this, press the locking button on the swing arm 8 down and move the grip 7. · Release the locking button 8 and turn the grip 7 until it engages. Equipping the massage head with accessories Select, according to the application requirement, an accessory (0, q, w, e, r, t) for the massage: The roller accessory 0: Stimulates the blood circulation. The nub accessory q: The 21 nubs are suitable for deep massage and large muscle groups. The surface accessory w: Use this accessory on the whole body to relieve muscle pain and tensions. The Shiatsu accessory e: The Shiatsu accessory simulates the finger posture of a masseur and is suitable for deep massage. The knead-massage accessory r: This accessory is suitable for kneading simulation and deep massage. The accessory for exacting massage t: Use this accessory for the massage of individual muscle groups. Release a possibly fitted accessory from the massage head 1, in that you hold the grip cavity 2 and pull it off. Place the accessory (0, q, w, e, r, t) of your choice on the massage head 1 and pay attention that the round curbs of the massage head 1 and the accessory (0, q, w, e, r, t) lie one on top of the other. Push the accessory (0, q, w, e, r, t) onto the massage head then check to make sure that it is firmly fixed. Taking into use Unpacking · Take the Infra Red Massage Appliance and the accessories from the packaging. · Remove all packaging material. Attention: Do not permit small children to play with plastic packaging. There is a risk of suffocation! Adjusting the rotatable parts of the massage appliance · With the revolvable ring 3 the massage head 1 can be turned through a radius of 270°. Thus either the infra red lamp 9 or the massage head 1 is directed at the body part to be treated. -4- Usage · Insert the power plug into a wall power socket. · Always start the massage at the position furthest from the heart and then slowly work towards the heart. Switching on · To switch on the Infra red lamp slide the switch INFRARED 4 into the position "I". · Slide the switch MASSAGE 5 into the position "I" for normal vibration. · For a stronger vibration slide the switch MASSAGE 5 into the position "II". Ending usage Switching off · After use, dependant on the application, return the switches INFRARED 4 and MASSAGE 5 back into the position "0". · Remove the plug from the wall power socket. WARNING! After use do not lay the Infra Red Massage Appliance down with the infra red lamp 9 facing downwards!It could still be hot and there is still a grave risk of fire! ATTENTION! After an extended heating-up of the infra red lamp 9 without bodily contact, the temperature of the lamp can be perceived as unpleasantly high!Always check the temperature of the infra red lamp 9 with the tip of a finger before making contact with the body itself. A temperature that is too high can be reduced by switching the infra red lamp 9 off for a short period. [. . . ] This appliance has been manufactured with care and meticulously examined before delivery. Should a claim need to be made under the warranty, please make contact by telephone with our service department. The warranty covers ONLY claims for material and maufacturing defects, not for wearing or consumable or for damage to fragile components. This product is for private use only and is not intended for commercial applications. [. . . ]