User manual SILVERCREST KH 2610

[. . . ] In the current operation instructions the following warnings are used: WARNING A warning of this danger level signifies a possible dangerous situation. GB IMPORTANT A warning of this danger level signifies possible property damage. This device is intended exclusively for the non-commercial use of scanning and digitizing film negatives and slides. This device is not intended for any other use or for uses beyond those mentioned. [. . . ] Dispose of packaging material that is no longer needed according to the regionally established regulations. NOTICE If possible preserve the device's original packaging during the warranty period so that in the case of a warranty claim you can package the device properly for return. For safe and faultless operation of the device the set-up location must fulfill the following provisions: The device must be placed on a firm, flat and level surface. Do not place the device in a hot, wet or very damp environment or in the vicinity of flammable materials. System prerequisites You will need a computer with a vacant USB port and with the operating system Windows® XP, Windows® Vista or Windows® 7 from the Microsoft® corporation. Installation of the drivers and the ArcSoft PhotoImpression 6 programme NOTICE In these operating instructions only the programme sections are described that you will need for scanning your slides and/or film negatives. You can find further information in the programme's on-line help. the illustrations and descriptions refer to the operating system Microsoft® Windows® Vista. The illustration depictions can differ, depending on the display settings, with other operating systems. NOTICE If you have switched off the autostart function and the installation process does not begin automatically you can start the installation process by double clicking on the file "autorun. When the device is connected for the first time the window "New hardware found" will be shown. NOTICE If you want to connect the device to another USB port the window "Device software installation" will be displayed. In this chapter you receive important information for the handling and operation of the device. Release the fastener on the front of the film holder 5 and open the holder. Release the fastener on the front of the slide holder 6 and open the holder. insert a maximum of 3 framed slides , correctly orientated , into the holder. Click on the button "Open photo" in the icon bar and then on the menu input "Receive from film scanner". The device will be automatically calibrated with the first programme start after installation. After completion of the calibration the programme window will be displayed. Carry out the necessary settings: File format, quality (only with JPG files), memory location, film type, colour depth, scan resolution NOTICE JPG files can only be generated with a colour depth of 24 bits. Slide the holder with the film strips and/or slides to be scanned into the slot 3 on the device until it locks into place. NOTICE A holder that has been inserted into the device cannot be pulled out again, it has to be pushed completely through the device. [. . . ] You receive a 3-year warranty for this device as of the purchase date. This device has been manufactured with care and meticulously examined before delivery. In the case of a warranty claim, please get in touch, by telephone, with our service department. NOTICE The warranty is valid only for material or manufacturing defects and not for transportation damage, wear and tear or for damages to breakable parts such as switches or power packs. [. . . ]