User manual SILVERCREST KH 2218

[. . . ] 6 Projection AlArm clock kH 2218 Projection AlArm clock operating manual KOMPERNASS GMBH BURGSTRASSE 21 D-44867 BOCHUM www. kompernass. com ID-Nr. : KH 2218-9/09-V7 09/2009 KH 2218 INDEX Intended Use Items supplied Technical Data Safety information The appliance components Putting the appliance into use Radio operation Cleaning Troubleshooting Notice regarding conformity Importer Disposal Warranty & Service PAGE 2 2 2 2 4 5 8 10 10 10 10 11 11 Read the operating instructions carefully before using the appliance for the first time and preserve this booklet for later reference. Pass this booklet on to whoever might acquire the appliance at a future date. -1- Projection Alarm Clock KH 2218 This documentation is copyright protected. All rights including those of photographic reproduction, duplication and distribution by means of particular methods (for example data processing, data carriers and data networks), wholly or partially as well as substantive and technical changes are reserved. Dimensions (W x H x D): Weight : Protection class: Backup Batteries 21 x 7 x 14. 1 cm 840 g approx. II / 2 x 1. 5 V, Type AAA/ Micro (not supplied) Safety information Warning A warning of this danger level signifies a possible dangerous situation. [. . . ] 1 2 2 3 3 4 5 6 7 8 8 8 9 10 11 Programme the reminder function You can programme in up to 10 dates on which the appliance can give you a reminder when they arrive. In the display j a date and the SDA 1 indicator for the memory date 1 blinks. Press the buttons UP/DOWN g/d to programme in the first desired memory date. 3. If you press the SNOOZE button f, the year number will be deactivated and you will thus receive a reminder on this date every year. Should you wish to programme in further dates, press the Page button a to select a memory slot from 2-10. 15 seconds, the appliance saves the adjustment and then leaves the programming mode. Pressing and holding one of the buttons DOWN/UP g/d changes the alarm time in intervals of 10 minutes. In the display j the last programmed alarm time and the symbol for the type of alarm blink (see below). 3. Once again press the selected Alarm|Radio Preset button, if need be repeatedly, until the desired alarm function (see tabel) is indicated in the display j. Alarm function Acoustic signal Radio Switched off no symbol 4. Press the button SNOOZE f to set the weekdays on which you require the alarm function: You can choose between "Workdays" (MON, TUE, WED, THU, FRI), "Weekend" (SAT, SUN), "Every day" and "On a specific day" (MON, TUE, WED, THU, FRI, SAT, SUN). Orientate yourself on the weekday indicator at the top right in the display: MON: = Monday TUE = Tuesday WED = Wednesday THU = Thursday FRI = Friday SAT = Saturday SUN = Sunday 5. Hold the button SNOOZE f pressed down for 2 seconds when you want to be woken on a specific weekday. To return to the selection of workdays, weekends or whole weeks, once again hold the SNOOZE button f pressed down for 2 seconds. The adjustment for the alarm function is now saved and will be shown. -7- Symbol in the display j 8. If needed, programme the other memory positions for alarm times as detailed above. and the alarm function "Radio" is selected, the radio switches itself on with increasing sound volume and the last adjusted radio station for one hour. and the alarm function "Signaltones" has been selected, the signal tone sounds for 10 minutes. To close the individual alarm function press any button except the SNOOZE button f. The Slumber function When you press the SNOOZE button f, the presently active alarm is cancelled for the time that is programmed for this function (see Section "Programme time for the slumber function", 1 - 59 min. , standard value = 9 min. ). The Reminder function The appliance will remind you of the dates that you have programmed in with the reminder function. In these cases and on these days, from 08:00 - 23:00 and on every full hour, the reminder alarm will sound for 10 minutes. Adjusting changing display indicators When the appliance is in Standby, press the button DOWN g. Press the button DOWN g once again, "­W" appears in the display (for Time and World Time). [. . . ] The time will now be projected onto the desired surface area for the pre-adjusted timespan (see section "Adjusting the Projection duration"). Should you wish to switch this function off prematurely, press the Projection button r and fold the Projector in. Troubleshooting The appliance doesn't work. > Is the plug of the power cable 1( inserted firmly into the power socket?> Using the focus regulator k sharpen the image. Cleaning Warning! [. . . ]