User manual SILVERCREST KH 2150

[. . . ] 3BC UNIVERSAL REMOTE CONTROL KH2150 UNIVERSAL REMOTE CONTROL Operating instructions KOMPERNASS GMBH · BURGSTRASSE 21 · D-44867 BOCHUM www. kompernass. com ID-Nr. : KH2150-07/08-V1 KH 2150 1 2 3 4 19 5 6 7 18 8 9 10 11 12 20 17 13 14 15 16 CONTENT Safety Appliance Overview First use PAGE 3 4 5 Proper use . . 29 Disposal Troubleshooting Technical data Manufacturer codes Personal macros Personal device codes Conformity Importer Warranty and Service 29 30 31 31 32 32 33 33 34 Read the operating instructions carefully before using the device for the first time and preserve these instructions for later reference. Hand over the instruction manual to whomsoever you might pass the device on to. 2 UNIVERSAL REMOTE CONTROL KH2150 Safety Proper use Children may only operate the remote control under adult supervision. [. . . ] TV appears in the LCD display (2). 18 Note: For a television, press the device button TV (4), then continue with step 8. appears on the LCD display (2). Note: The remote control searches the device list in the forward direction. To change the search direction, press "Minus" on the CH button (17). To return to a forward search, press "Plus" on the CH button (17). Press the "Plus" CH button (17) repeatedly until your device responds. If your device only partially responds, repeat the steps with the next device code. BRAND CODES Select a manufacturer code from the "Manufacturer codes" table. The table can be found at the end of the operating instructions. Note: To conclude your input, press the EXIT button (8). Switch on the device for which you would like to program the remote control. Hold the S button (5) pressed until CODE-SETUP appears in the LCD display (2). Press the down arrow button (6) repeatedly until BRAND CODES appears in the LCD display (2). TV appears in the LCD display (2). Note: For a television, press the device button TV (4), then continue with step 8. The next device in the list is displayed. 19 Note: All entries in the device list can be found in the overview graphic. Search for the manufacturer code in the "Manufacturer codes" table in the appendix to these operating instructions. appears in the LCD display (2). Note: To change the search direction, press "Minus" on the CH button (17). If your device only partially responds, repeat steps 1 to 11 with a different manufacturer code from the table. Repeat steps 1 to 11 for all devices that you would like to operate. Entering device codes for combination devices For combination devices, such as television/VCR or DVD/ VCR, it is necessary to enter a device code for each device type. Controlling combination devices Some combination devices, such as TV/VCR or DVD/VCR, have separate device buttons on the original remote control. The VCR signal is sent. Note: Not all devices support switching between two devices with the S button (5). Display device code The current device code for each device can be displayed. The LCD display (2) shows DVD CODE 0768, for example. Note: Note the identified device code in the table "Personal device codes" at the end of these operating instructions. 20 TIMER SETUP ­ Timer functions Program the automatic switch-off function SLEEPTIMER and the automatic switch-on function "TIMER". See the graphic "TIMER-SETUP overview". TV SLEEP SETUP The SLEEPTIMER function automatically switches off the television after the configured time has elapsed. The SLEEPTIMER function can be set between 1 and 90 minutes. TV SLEEP SET Programming the SLEEPTIMER function. Hold the S button (5) pressed until CODE-SETUP appears in the LCD display (2). Press the down arrow button (6) repeatedly until TIMERSETUP appears in the LCD display (2). [. . . ] - when the remote control does not react to button presses. Cleaning the remote control Warning! If moisture enters into the device, the remote control could be irreparably damaged!Clean the housing and buttons of the remote control only with a slightly damp cloth and a mild cleanser. Ensure that no moisture enters the remote control during cleaning! Disposal Do not dispose of the device in your normal domestic waste. Dispose of the device through an approved disposal centre or at your community waste facility. [. . . ]