User manual SILVERCREST KH 205

[. . . ] Use it only in dry rooms, do not use it when it is raining outdoors or when close to liquids. â· Ensure that, when the receiver is in use, it cannot become wet or moist and that it cannot be damaged. Taking the appliance into use Take the appliance out of the carton and remove all packaging materials. [. . . ] The precondition for this is that the sender and receiver within a system are working on the same frequency. For this, you must synchronise the appliances as follows: Press the synchronisation button on the receiver The red signal indicator now glows. If the synchronisation has been a success, the receiver notifies you of the programmed call signal. Should the receiver not react as described, repeat the synchronisation. The sender shows, with a brief glowing of the indicator f when being activated, the transmission of the signal to the receiver. Installing the appliance Select a suitable positioning for the sender, close to your outer door. Using the assembly plate j of the sender, mark the positions required for the two boreholes (spacing approx. Carefully slide the plastic covering over the nameplate d to the side and then remove it. Write the name(s) of the residents on the plate d and then replace the plastic covering. Place the sender on the assembly plate j and secure it, with the enclosed small screws, to the assembly plate j. You can install the receiver at a suitable location either suspended by its loop o or make use of the stand t. If being utilised in a building, this range is reduced quite distinctly. To suspend the receiver, fix the enclosed screw, with the wallplug, at a suitable location on the wall and hang the appliance from it. In the event of malfunction or apparent damage, make contact with Customer Services. If the appliance is not to be in use for an extended period, remove the batteries. NEVER submerse the appliance or its components in water or other fluids! â· Do not allow any liquids to penetrate into the appliance housing. Cleaning the appliance: Clean the appliance only with a dry or lightly moistened cloth. [. . . ] This appliance conforms with the fundamental requirements and other relevant regulations of the R&TTE Directive 1999/5/EC. A complete copy of the original conformity declaration is available from the importer. You receive a 3-year warranty for this device as of the purchase date. [. . . ]