User manual SILVERCREST KH 1610

[. . . ] 6 ELECTRIC HOT TRAY KH 1610 Electric hot tray Operating instructions KOMPERNASS GMBH · BURGSTRASSE 21 · D-44867 BOCHUM www. kompernass. com ID-Nr. : KH1610-07/09-V2 KH 1610 1 2 34 4 76 5 ELECTRIC HOT TRAY KH1610 Intended use This appliance is designed for keeping food warm in domestic households and is only to be utilised in dry rooms. This appliance is not intended for the warming or heating up of foodstuffs or other materials directly on the hotplate. This appliance is NOT intended for use in commercial or industrial applications or for use outdoors. · To avoid unnecessary risks, in the event of damage to the plug and/or the power cable arrange for it/them to be exchanged as soon as possible. To avoid the risks of fire or injury: · NEVER touch the hotplate when the appliance is in use. [. . . ] In this case, immediately remove the plug from the wall socket and arrange for the appliance to be repaired. Items supplied Electric hot tray Power cable Operating instructions Technical data Voltage : Power consumption : 230V~50Hz 1100 W -1- Appliance description 1 Hotplate 2 Power cable 3 Connection socket 4 Grip 5 On/Off switch 6 Control lamp "Mains power connected" 7 Control lamp "Ready for use" · Position the On/Off switch 5 at "On" (--). As soon as the appliance has reached its highest temperature the control lamp "Ready for use" 7 glows. · First remove the plug from the wall power socket and then the plug from the connection socket 3 on the appliance. The appliance is now independant from mains power and retains its heat for approx. one hour. First implementation · Remove all packaging materials from the appliance and then clean it as described in the chapter "Cleaning and Care". · Place the appliance on a dry, flat and heat-resistant surface. · Warm the appliance up as described in the chapter "Utilisation". Risk of Burns! Take hold of the food warmer ONLY by means of the grips 4 provided on it. · Place the food warmer at the place where you wish to use it. Note: You can also leave the appliance connected to mains power after it has been warmed up. It could then happen that, during use, the control lamp "Ready for use" 7 briefly extinguishes itself and then glows once again. This indicates that the set temperature had fallen and the appliance had warmed itself back up. Note: On the first usage, a slight odour can occur (minimal smoke development is also possible). · Remove the plug from the wall power socket. Utilisation · Place the appliance on a dry, flat and heat-resistant surface. · First insert the plug of the power cable 2 into the connection socket 3 and then connect the power cable 2 with a wall power socket. The control lamp "Mains power connected" 6 glows. Cleaning and Care Attention! Before cleaning, ALWAYS remove the plug from the wall power socket!These could damage the upper surfaces of the appliance. -2- NEVER submerse the appliance in water or other liquids. · The hotplate 1 can, if required, be cleaned with a special stainless steel cleaning agent. · Wipe off any possibly remaining cleaning agent residues with a damp cloth. [. . . ] This product is subject to the provisions of European Directive 2002/96/EC. Dispose of the appliance through an approved disposal centre or at your community waste facility. Dispose of the packaging materials in an environmentally responsible manner. e-mail: support. ie@kompernass. com Importer KOMPERNASS GMBH BURGSTRASSE 21 44867 BOCHUM, GERMANY www. kompernass. com -3- [. . . ]