User manual SILVERCREST KH 1159

[. . . ] ⷠEnsure that the batteries are inserted with the correct polarity and do not apply excessive force when inserting them. Avoid contact with solvents and with corrosive or abrasive cleaning materials. ⷠDo not subject the scale to high temperatures or powerful magnetic fields. These can cause erroneous displays and/or the sudden deactivation of the scales. [. . . ] Should you bore into a power cable with the drill, you may receive a potentially fatal electric shock!Do not drill into areas where electric cables and gas or water conduits are, or may be, located!Insert the plugs into the holes and then screw in the screws until the screwheads project by about 3 - 4 mm. Place the scales onto the screw heads using the mounting e intended for this purpose. You can choose between the metric and the AngloAmerican (Imperial) system. From 0 g - 999 g the unit is indicated in g/oz and from 999 g in kg/lb and g/oz. To switch between the metric and Anglo-American systems, press the UNIT t button until the measurement unit details change. To switch within a measurement system, g/kg - ml water - ml milk or oz/lb:oz - fl´oz water - fl´oz milk briefly press the UNIT t button until the desired measurement unit appears in the display w. Place the bowl o, or another suitable receptacle, onto the scales and then press the button Z/T y. The scales once again shows "0", it does not take account of the weight of the receptacle. You can repeatedly set the scale back to "0" in order to weigh additional partial quantities. On removal of the receptacle and ingredients from the scales, and on pressing the button Z/T y, "O" is once again indicated in the left of the display w. On removal of the receptacle and ingredients from the scales, and on pressing the button Z/T y, "O" is once again indicated in the left of the display w. Der Timer enables you to set the clock for a specific period of time, at the end of which a signal tone sounds. If you hold down the Z/T y or the UNIT t buttons, the time-indicators run through faster. When you no longer require the scales, fold the glass plate i back upwards. if the display w briefly indicates "Err" and the weighing mode cannot be switched on , the scale is overburdened. Remove material from the scale and then switch the scale back on again. Should the malfunction not be eliminated with these steps please make contact with our Service Centre (see "Warranty and Service"). When the scale is switched on, the display w shows the temperature in °C at the top right. [. . . ] The warranty for this appliance is for 3 years from the date of purchase. The appliance has been manufactured with care and meticulously examined before delivery. In the case of a warranty claim, please make contact by telephone with our service department. The warranty covers replacements for material or manufacturing faults only, not for normal wearing parts or damage to fragile parts. [. . . ]