User manual SILVERCREST KH 4423 CORDLESS HAND-HELD VACUUM CLEANER

[. . . ] To avoid risks, arrange for damaged power cables and/or plugs to be replaced as soon as possible by a qualified specialist or by our Customer Services. Interferences that are not carried out by a specialist workshop could lead to physical injuries. This appliance is not intended for use by individuals (including children) with restricted physical, physiological or intellectual abilities or deficiences in experience and/or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the appliance is to be used. Children should be supervised to ensure that they do not play with the appliance. [. . . ] Use the wall holder 3 to mark the boreholes: this will ensure the spacing is correct. Insert the wallplugs into the boreholes and, using the screws, firmly screw the wall holder 3 to the wall. Check to ensure that the on/off switch 6 has been slid back (to the position "0") before starting the charging process. Place the hand vacuum cleaner from above into the wall holder 3 so that the barrel plug 5 slips into the socket on the hand vacuum cleaner. Make certain that the dust filter 9 is always inserted before using the appliance. Only vacuum up enough fluid/rubbish until the dirt container 0 is filled to the MAX marking. Take the hand vacuum cleaner from the wall holder 3 or, if you do not use the wall holder 3, remove the barrel plug 5 from the socket. The crevice nozzle 2, to clean narrow and difficult to reach locations. When the charging process is complete, which may take 12 to 15 hours for completely discharged batteries, the device switches over to a trickle charge (maintenance function) automatically. Nevertheless, in order to avoid possible damage to the batteries, do not leave the appliance permanently connected to the power adapter 4. Reconnect the appliance with the power adapter 4 when the suction power has become noticeably weaker. After you have vacuumed up liquids, immediately clean the dirt container 0. When you have finished using it, slide the on/ off switch 6 to the rear. Place the hand vacuum in the wall holder 3 and start the charging process when the vacuum power has become noticeably weaker. The hand vacuum cleaner can also be charged directly via the power adapter 4. For this, remove the barrel plug 5 with a slight twist from the wall holder 3 and insert it into the socket on the hand vacuum cleaner. To achieve the best results, empty the dirt container 0 and clean the dust filter 9 after every use. This product is subject to the provisions of European Directive 2002/96/EC. [. . . ] The warranty applies only to claims for material and maufacturing defects, not for transport damage, wearing parts or for damage to fragile components, e. This product is for private use only and is not intended for commercial applications. In the event of misuse and improper handling, use of force and interference not carried out by our authorized service branch, the warranty will become void. The warranty period will not be extended because of a repair made under warranty. [. . . ]