User manual SILVERCREST KH 2357 BLUETOOTH® HANDS-FREE KIT

[. . . ] If you wish to connect the appliance to another appliance, read the operating instructions to obtain detailed safety instructions. HF signals can, under circumstances, negatively influence the function of not properly installed or not sufficiently shielded electronic systems in vehicles, e. For further information about your vehicle or its possible ancillaries make contact with the respective manufacturer or their representative. The Bluetooth® Hands-Free Kit KH 2357 is designed for use in vehicles with a voltage of 12-24 V. [. . . ] A detailed description of how to do this is to be found in the operating instructions for your mobile telephone. To switch the device off, press and hold the multi-function button 4 for about 3 seconds. A long, low signal tone will be heard and the LED status display 6 extinguishes. ⷠPosition the hands-free appliance and the mobile telephone so that they are not more than 1 metre away from each other. ⷠPress and hold down the multi-function button 4 for 6 seconds until, after 3 seconds a short, high signal tone and after a further 3 seconds a succession of low and high signal tones are heard. The LED status display 6 lights up constantly and the hands-free equipment is now in the coupling mode. Enter in the pre-programmed pass code , , 9999" and then confirm it, which couples the appliances with each other. This mobile telephone will now become the standard telephone for the hands-free appliance. You will hear a longer signal tone and the LED status display 6 blinks every 3 seconds. If the coupling is not completed within 2 minutes, the hands-free appliance switches itself off. The LED status display 6 extinguishes and you will hear a long and deep signal tone. With some mobile telephones it is possible that coupling does not automatically take place. In this case coupling must be carried out additionally on the mobile telephone. The LED status display 6 blinks twice every 3 seconds until this has been carried out. Further information can be found in your mobile telephone's operating instructions. You can couple the hands-free appliance with up to eight mobile telephones. If a further mobile telephone is coupled with the hands-free appliance, the coupling information of the first coupled mobile telephone is erased. When the hands-free appliance is switched on, within a few seconds it tries to create a connection with the standard or the last used mobile telephone. Should no connection be possible, the hands-free appliance remains nonetheless recognisable for other mobile telephones. To use the hands-free appliance with a coupled mobile telephone which is not the standard or the last used mobile telephone, a connection must be made over the Bluetooth® menu of the mobile telephone. If you wish separate the mobile telephone from the hands-free appliance, for example, to connect it to another Bluetooth® appliance: · You need not erase the coupling with the hands-free appliance in the Bluetooth® menu to separate the connection. If you wish to re-connect the hands-free appliance with the standard, resp. [. . . ] The warranty for this appliance is for 3 years from the date of purchase. The appliance has been manufactured with care and meticulously examined before delivery. In the event of a warranty claim, please make contact by telephone with our Service Department. The warranty covers only claims for material and maufacturing defects, but not for transport damage, for wearing parts or for damage to fragile components, e. [. . . ]