User manual SILVERCREST KH 2302 MP3 SYSTEM

[. . . ] If you do not intend to use the device for an extended period, remove the batteries. in the event of the batteries leaking acids , wear protective gloves. Clean the battery compartment and the battery contacts with a dry cloth. Make sure that liquids or objects are never able to enter into the device. [. . . ] ⷠInsert the antenna plug of the house antenna into the connection socket 75 OHM JACK on the micro system. To switch the device completely off, press the button POWER once again. The programming for the time is NOT retained if the device is separated from the power network. You can adapt the sound quality to the respective type of music by means of the sound setting. You can choose between the following settings: POP - JAZZ - FLAT - CLASSIC - ROCK · Press the button EQ repeatedly until the required sound adjustment is indicated in the display. If you adjust the sound setting while playing, the sound will change immediately. You can select from the following modes: CD (CD playback) USB (Playback of MP3 files from a USB memory stick) CARD (Playback of MP3 files from a memory card) AUX (Playback of an audio device connected to the connection You can only adjust the clock in standby mode. To raise the sound volume, press the button VOLUME+ on the remote control or on the front of the device. ⷠTo lower the sound volume, press the button VOLUME- on the remote control or on the front of the device. To switch the sound back on, press the MUTE once again or press one of the VOLUME buttons. The programming for the time is NOT retained if the device is separated from the power network or switched off with the power switch. For this purpose you can set the desired waking time, the sound source and the volume. The micro-system will then switch itself on and off according to the set time. You can choose to be woken by the radio or by sounds from a CD, memory card or a USB memory stick. To save the setting, press the button TIMER once If you wish to be woken by sounds from a CD, memory card or a USB memory stick, you must insert the appropriate medium beforehand. if you wish to be woken by the radio , tune in to a radio station as described under "Radio mode". To be able to carry out the following programmings, the device must be in the standby mode. To reactivate the alarm function, press the button TIMER once again and carry out the steps described above to programme in the alarm function. You can detemine a time after which the micro-system will switch itself off. To switch the sleep function off, press the button SLEEP repeatedly until OFF is indicated in the display. You can save stations in up to 45 programme locations (30 x UKW and 15 x MW). You can receive VHF (FM) and MW (AM) transmissions with the micro system. [. . . ] The purpose of this obligation is to ensure that batteries are disposed of in a non-polluting manner. You receive a 3-year warranty for this device as of the purchase date. Should you, in spite of our high quality standards, have grounds for complaint please contact our Service Hotline. In the event that processing of your complaint is not possible by telephone here you will receive · A processing number (RMA-Number) as well as · An address to which you can send your product for warranty processing. [. . . ]