User manual SILVERCREST KH 2218 PROJECTION ALARM CLOCK

[. . . ] Additionally, the appliance is fitted with an alarm function using either radio or a signal tone. This radio alarm is not intended for use in commercial or industrial applications. No warranty is provided for damages resulting from improper use of the appliance!Do not expose the appliance to rain and never use it in a humid or wet environment. [. . . ] Also here, the above listing of programmable cities and their time difference is valid. Press the SNOOZE button to switch the summer daylight saving time either on or off for the selected time zone. Programme the reminder function You can programme in up to 10 dates on which the appliance can give you a reminder when they arrive. Press the buttons UP/DOWN g/d to programme in the first desired memory date. If you press the SNOOZE button f, the year number will be deactivated and you will thus receive a reminder on this date every year. Should you wish to programme in further dates, press the Page button a to select a memory slot from 2-10. To deactivate the memory function, programme in a date that lies in the past. Programme the Update function With this function the appliance can automatically up-date the time by using RDS-Data. Press the buttons DOWN/UP g/d to adjust the time span for the switch off timer to between 01 and 59 minutes. In the adjustment "OFF" the projection is permanent and can be switched off by pressing the PROJECTION button r once again. Using the buttons DOWN/UP g/d set the desired time interval (a time span between 1 minute and 23:59 h is possible). If you wish to end the Timer function before the alarm, press and hold the button USER|NAP i for one second. Alarm function (Alarm 1 to 4) You can programme in up to four alarm times on your radio alarm. 15 seconds, the appliance saves the adjustment and then leaves the programming mode. Pressing and holding one of the buttons DOWN/UP g/d changes the alarm time in intervals of 10 minutes. Once again press the selected Alarm|Radio Preset button, if need be repeatedly, until the desired alarm function (see tabel) is indicated in the display j. Press the button SNOOZE f to set the weekdays on which you require the alarm function: You can choose between "Workdays" (MON, TUE, WED, THU, FRI), "Weekend" (SAT, SUN), "Every day" and "On a specific day" (MON, TUE, WED, THU, FRI, SAT, SUN). orientate yourself on the weekday indicator at the top right in the display: MON: = Monday TUE = Tuesday WED = Wednesday THU = Thursday FRI = Friday SAT = Saturday SUN = Sunday 5. Hold the button SNOOZE f pressed down for 2 seconds when you want to be woken on a specific weekday. To return to the selection of workdays, weekends or whole weeks, once again hold the SNOOZE button f pressed down for 2 seconds. If needed, programme the other memory positions for alarm times as detailed above. And the alarm function "Radio" is selected, the radio switches itself on with increasing sound volume and the last adjusted radio station for one hour. [. . . ] This product is for private use only and is not intended for commercial use. The warranty is void in the case of abusive and improper handling, use of force and internal modifications not carried out by our authorized Service Centre. The warranty period is not extended through repairs made under warranty. Any damages or deficiencies found on purchase must be reported as soon as possible after unpacking, at the latest two days after purchase. [. . . ]