User manual SILVERCREST KH 206 WIRELESS DOORBELL

[. . . ] Use it only in dry rooms, do not use it when it is raining outdoors or when close to liquids. â· Ensure that, when the receiver is in use, it cannot become wet or moist and that it cannot be damaged. : Button for sound volume control r : Button for melody selection : Signal type switch (optical/acoustic) t y Speaker u Stand i Battery compartment - receiver o Loop for suspension of the receiver a Battery compartment cover - receiver Transmitter (Fig. [. . . ] If the synchronisation has been a success, the receiver notifies you of the programmed call signal. the appliances terminate the synchronisation mode and the signal indicator q goes out. Should the receiver not react as described, repeat the synchronisation. The transmitter shows, with a brief glowing of the indicator f when being activated, the transmission of the signal to the receiver. Installing the appliance Select a suitable positioning for the transmitter, close to your outer door. Using the assembly plate h of the transmitter, mark the positions required for the two boreholes (spacing approx. Write the name(s) of the residents on the nameplate d and then place the plastic covering. Place the transmitter on the assembly plate h and secure it, with the enclosed small screw, to the assembly plate h. You can install the receiver at a suitable location either suspended by its loop o or make use of the stand u. If being utilised in a building, this range is reduced quite distinctly. To suspend the receiver, fix the enclosed screw, with the wallplug, at a suitable location on the wall and hang the appliance from it. In the event of malfunction or apparent damage, make contact with Customer Services. If the appliance is not to be in use for an extended period, remove the batteries. NEVER submerse the appliance or its components in water or other fluids! â· Do not allow any liquids to penetrate into the appliance housing. Cleaning the appliance: Clean the appliance only with a dry or lightly moistened cloth. In the event of the batteries leaking acids, put on a pair of protective gloves. Then clean the battery compartment and the battery contacts with a dry cloth. [. . . ] The appliance has been manufactured with care and meticulously examined before delivery. In the event of a warranty claim, please make contact by telephone with our Service Department. The warranty covers only claims for material and manufacturing defects, but not for transport damage, for wearing parts or for damage to fragile components, e. [. . . ]