User manual SILVERCREST KH 2030 MULTI-BAND RADIO

[. . . ] In order to avoid the device being switched on unintentionally, remove the adapter from the mains socket after each use and before cleaning. The device's safety concept can only work if the device is in perfect condition. A mains adapter connected to the device must always be easily accessible so that the device can be quickly disconnected from the mains power in an emergency. The mains voltage must agree with that stated on the device's specification plate. [. . . ] Keep either of these buttons pressed for a few seconds to change the date in ten-day steps. Press the UP or DOWN button to move the time zone forward or backward. UTC is the reference for the times of the various time zones around the world. The screen shows the SUN OFF message when summer time has been deactivated. Summer time offset is now activated and the clock moves one hour ahead. Press the UP or DOWN button to move the time zone forward or backward. Press the UP or DOWN button to set the date on which the alarm should sound. Press the SNOOZE button to ignore the year number setting so that the alarm sounds every year. If the current date is the same as the SDA date, an alarm sounds every hour from 8 o'clock on this day. In order to completely deactivate the date alarm set a date that is in the past!You can select which information is shown on the screen when the radio is switched off. the selected mode is indicated by a corresponding symbol on the screen. When the radio is switched off, select the display mode by repeatedly pressing the FINE button in accordance with the following table: Symbol on the screen display mode CLK only the time is displayed CITY The time and world time are shown in succession DATE The time and date are shown in succession CIT DAT the time, date and world time are shown in succession The world receiver provides two alarms that can be set independently of one another, AL1 and AL2. Whether the alarm should operate on every day of the week or only from Monday to Friday; . Press the UP or DOWN button to move the alarm time forward or backward at minute intervals. Hold down one of the buttons for a few seconds to move the setting forward or backward quickly at 10 minute intervals. Press the SNOOZE button to set the weekday on which you want the alarm to sound: You can choose between week days (Mo, Tu, We, Th, Fr), weekend (Su, Sa), every day (Su, Mo, Tu, We, Th, Fr, Sa) or the current day of the week. Hold down the SNOOZE button until the screen shows an individual week day. To go back to selecting week days, weekend or every day, briefly hold down the SNOOZE button again. Press the MODE button to save the setting and return to the time mode. The setting is also saved if you wait around 15 seconds until the screen returns to displaying the time. And the "signal sounds" alarm function has been selected, the signal sound is played for 10 minutes. [. . . ] If, in spite of our high quality standards, you have reason to complain about this device, please contact our service hotline. If it is not possible to deal with your complaint by phone, they will provide · a processing number (RMA number) and · An address where you can send your product for repairs under the warranty. If you send the device please enclose a copy of the proof of purchase (till receipt). The device must be packaged securely for transport and the RMA number must be directly visible. [. . . ]