User manual SILVERCREST KH 1172 BREAD MAKER

[. . . ] Safety instructions Appliance Overview Items supplied Intended use Technical data Characteristics Before the First Use Before baking Control panel Functions of the Bread Baking Machine Error Messages Baking bread Read the operating instructions carefully before using the appliance for the first time and preserve this booklet for later reference. Please read the operating instructions through completely before using the appliance for the first time!Children can suffocate through the improper use of packaging materials. Dispose of them immediately after unpacking or store them in a place that is out of reach of children. [. . . ] With the button Start/Stop you can break off the programme in any position: Hold the button Start/Stop pressed down until a signal tone is heard. Should you wish to use a different programme, select it with the button Programme selection . Programme Cake In this programe the ingredients are kneaded, allowed to rise and then baked. Programme Bake For the after-baking of breads that are not brown enough, not baked through or ready-made dough. All kneading and rising processes are dispensed with in this programme. To switch the appliance off, remove the plug from the wall power socket. In the programmes 1 to 7 to give notice that grains, fruits, nuts or other ingredients can now be added, · on reaching the end of the programme · During the keep-warm phase, at the end of the baking process, the signal tone sounds several times in succession. Should there be an electricity power cut of more than 10 minutes the Bread Baking Machine must be started anew. This is only practicable if the dough, at the time of interruption in the programme process, had not passed beyond the kneading process. With electricity power cuts of less than 10 minutes duration the programme continues itself automatically from the appropriate position (see chapter "Memory function"). The programme "Bake" does not allow itself to start until the appliance has cooled itself down. Before after-baking a loaf, wait until the appliance has cooled itself down. The programme is, with the switch-on after electricity power cuts of less than ca. 10 minutes duration , automatically continued from the same position. If the display 7 shows "HHH" after the programme has been started, it indicates that the temperature in the Bread Baking Machine is still too high. Open the appliance lid 2 and allow the machine to cool down before re-using it. If a new Programme cannot be started directly after the Bread Baking Machine has completed a baking process, it means the appliance is still too hot. in this case the display panel reverts to the default setting (Programmme 1). Open the appliance lid 2 and allow the machine to cool down before re-using it. Turn the baking mould 4 lightly in a clockwise direction, until it is sitting correctly in the baking space 0. The appliance does not allow itself to start until the appliance has cooled itself down. If the display 7 indicates "EEE" after the programme has been started, first of all switch the Bread Baking Machine off and then back on by removing and then re-inserting the power plug from/into the wall socket. [. . . ] In the case of a warranty claim, please make contact by telephone with our service department. The warranty covers only claims for material and maufacturing defects, not for worn parts or for damage to fragile components, e. This product is intended for domestic use only, it is not intended for commercial appliacations. In the event of misuse and improper handling, use of force and interference not carried out by our authorized service branch, the warranty will become void. [. . . ]