User manual SILVERCREST KH 1098 COFFEE MAKER

[. . . ] Should liquids nonetheless permate into the appliance housing, immediately remove the plug from the wall socket. Lay the power cable in such a way that no one can tread on or trip over it. This appliance is not intended for use by individuals (including children) with restricted physical, physiological or intellectual abilities or deficiences in experience and/or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the appliance is to be used. Children should be supervised to ensure that they do not play with the appliance. [. . . ] When the brewing process is complete, the coffee is kept warm by the keep-warm plate r for two hours. Should you wish to switch the coffee maker off earlier, repeatedly press the button ON/AUTO/OFF s until the indicator lamps y / u are extinguished. After the brewing process the coffee machine must first cool down, for at least 10 minutes, before you start another brew. Using the measuring spoon, place coffee powder (coarse to medium ground) into the filter q. Note: Should you use finely ground coffee powder it could block the filter q, water can no longer flow through it and the coffee maker could overflow!When filling the appliance with water, never exceed the MAX marking in the water tank e. Note: After brewing, there is always somewhat less coffee in the glass jug l than the amount of water that you filled the water tank e with. With this coffee maker you can fill a cup with coffee using only one hand: · When there is coffee in the glass jug l, press and hold your cup against the coffee button d. Note: Regularly empty and clean the driptray under the driptray grill f. Note: If you pour coffee using the coffee button d, a small amount of coffee will always be left in the glass jug l. You can also pour coffee from the glass jug l in the usual manner: · Note: If, before you lift the glass jug l out, you have activated the coffee button d, it can happen that a few drops of coffee will drip from the glass jug l. By use of the button PROG a, you can programme the coffee maker so that it starts the brewing process at a pre-determined time (Timer function). First, always fill the filter q in the filter basket 1( with coffee powder and the water tank e with water. Ensure that the glass jug l is empty and the water tank e is not filled beyond the Max marking. When the desired start time has been entered in, press the button PROG a once more. The coffee maker will now start the brewing process at the programmed time. Before you clean the Coffee Maker you MUST remove the plug from the power socket. Always wait until the coffee maker has cooled down before cleaning it. Clean the glass jug l, filter q and filter basket 1( in mild sudsy water and rinse them with lots of clean and clear water. If coffee powder or something similar has deposited itself in the coffee sieve of the glass jug l, proceed as follows: Scale removal is already necessary after ca. [. . . ] This product is for private use only and is not intended for commercial use. The warranty is void in the case of abusive and improper handling, use of force and internal tampering not carried out by our authorized service branch. The warranty period will not be extended by repairs made under warranty. Any damage and defects extant on purchase must be reported immediately after unpacking the appliance, at the latest, two days after the purchase date. [. . . ]