User manual SILVERCREST KH 1097 PARTY WOK

[. . . ] To avoid unnecessary risks, should the power cable or its plug become damaged arrange for them to be replaced as soon as possible. In cases of danger, immediately remove the electrical plug from the socket. Never use the appliance for purposes other than those for which it was designed. Always remove the power cable from the wall socket, and also from the appliance, if the appliance is not in use, when removing components and before cleaning it. [. . . ] On the first usage, the generation of light smoke and a slight smell can occur, this is due to production residues. If the appliance is positioned with the long side facing the mains power plug, guide the cable through the clamp. Place the switched-on Party Wok exclusively on level, firm and heat-resistant surfaces in a dry environment. The avoid the risks of heat influences and fire in the area adjacent to the switched on Wok, always ensure that . The switched-on Party Wok is at all times located at a minimum distance of 50 cm from walls, furniture and other objects. There are no easily inflammable objects close to the switched-on Wok (e. The power cable 6 and the cooking plate 1 are not located close to hot surfaces or open flames. If the appliance is positioned with the short side facing the mains power plug, guide the cable through one of the two long cable guide shafts on the underside of the cooking plate 1. For this, place the pastry directly into the cavities on the cooking plate 1. To turn the Crêpes, use only the supplied plastic spatulas 4, otherwise the anti-stick coating on the cooking plate 1 could be damaged!The appliance warms itself up and reaches the designated operating temperature within 15 minutes. First of all, always remove the power cable 6 from the mains power socket before cleaning the Electrical Wok and its components!After using the Party Wok always wait until the cooking plate 1 and the Wok pans 3 have cooled down completely!Never lay aluminium foil or other materials between the cooking plate 1 and the Wok pans 3, if you do, irreparable damage may be caused to the Party Wok. When you have finished cooking, remove the plug from the mains power socket. Do not use abrasive cleaners or scouring pads, if you do, the anti-stick coating on the Wok pans 3 and the cooking plate 1 will be scratched and become unusable!When you have removed the power cable 6 of the Party Wok from the mains power socket, and the Wok pans 3 and the cooking plate 1 have cooled down . Using the plastic spatulas 4, remove all remaining food residues from the Wok pans 3. Do not use any abrasive cleaners or scouring pads, these will destroy the non-stick surfaces of the Wok pans 3 will be scratched and become unusable!Remove the power cable from the wall socket and allow the cooking plate 1 to cool down. Should the malfunction not be corrected by the measures described above, please make contact with one of our service-partners in your locality. This product is subject to the provisions of European Directive 2002/96/EC. [. . . ] Any damage and defects extant on purchase must be reported immediately after unpacking the appliance, at the latest, two days after the purchase date. Repairs made after the expiration of the warranty period are subject to payment. Should the pastry be too thick after standing, add a small glass of water and stir the pastry again. Place a ladle of pastry into each of the cavities on the cooking plate 1 and smooth the crêpe pastry with the back of the ladle 5. [. . . ]