User manual SILVERCREST DPF-710A

[. . . ] To avoid the danger of fire if the power adapter is not going to be used for a long while (e. g. during holidays), it should always be disconnected from the power socket. Before stormy weather when there is the danger of lightning, disconnect the device from the power supply. Cables Always hold all cables by the plug and never pull on the cable itself. Never hold the power adapter with wet hands as this may cause a short circuit or electric shock. [. . . ] Use one screw for vertical or two screws for horizontal mounting with a head diameter of max. Please bear in mind that a suitable wall outlet should be located near the wall mount location. Pedestal Mounting In order to place the digital photo frame onto a table you will need to attach the supplied pedestal (D) onto the back panel of the device. Insert the pedestal into the hole (8) and turn it 90 degrees clockwise until it clicks into place. The asymmetrical shape of the pedestal makes it impossible to mount it in inverted direction. Once the pedestal is attached you can choose whether to place it horizontally or vertically on the table. i 8 Please note that the digital photo frame does not detect whether the pictures have been recorded in portrait (vertical) or landscape (horizontal) format. It might be necessary to optimise the picture by using a suitable image-editing programme on a computer. Digital Photo Frame DPF-710A Connecting English Insert the round-shaped plug (13) of the cable into the connection port (7) of the photo frame and the flat-shaped plug (12) of the cable (C) into the power out receptacle of the power adapter (B). Plug the power adapter into a wall outlet. Control Panel 1 2 3 4 5 6 Navigation up Navigation down Navigation right Navigation left Enter - Confirm Menu on/off 9 English Inserting the Memory Card Digital Photo Frame DPF-710A The built-in card reader can read the following memory cards (alphabetical order): Without adapter card MMC MMC Plus MS MS-Pro SD SD HC xD With adapter card Micro SD Mini SD MMC micro MMC mobile RS-MMC RS-MMC DV Insert a memory card (see table) into the card reader (10) at the bottom of the device until it fits in place. The memory card can only be inserted when its contacts point towards the photo frame front panel. To remove the memory card, simply pull it out. i 10 You can insert and remove the memory card while the device is powered on. If you insert a memory card while the unit is powered on, a summary of the pictures contained on the card will be displayed immediately. Digital Photo Frame DPF-710A Operation Powering the Device On/Off English Slide the On/Off switch (11) to the "On" position to power on the device or slide it to the "Off" position to power it off. Press right (3), left (4), down (2), up (1) to select the desired picture portion. This feature is available only when the current picture has been previously zoomed in. A picture can be zoomed out only till it reaches the original picture size. The rotation will not be saved, therefore the next time you view the picture it will appear as before rotation. The rotation will not be saved, therefore the next time you view the picture it will appear as before rotation. 13 English Digital Photo Frame DPF-710A A safety prompt will appear. If the inserted memory card is write-protected the deletion cannot be executed. Opens the Preferences menu (see page 16 - Preferences). Displaying the Clock and Calendar Open the Clock and Calendar display by selecting the centre icon ( ) ­ see figure on page 11 - and press the Enter (5) button. The clock will appear: Press the Enter (5) button again to enable the calendar. i 14 Press Enter (5) to toggle between the clock and calendar view. Digital Photo Frame DPF-710A Setting Date and Time English To set the date and time, press and hold Menu (6) while the clock or calendar is displayed until the following menu appears: To set the clock To set the date To set the date and time format Press the buttons right (3) or left (4) to select the desired icon and enable it by pressing Enter (5) to enable the selected function. To set the time, press right (3) or left (4) to select the hours, minutes or seconds and press up (1) and down (2) to set the desired value. Press the Enter (5) button to apply the changes and to return to the above menu. For the date format, press up (1) and down (2) to choose between month/day/year, day/month/year or year/month/day. [. . . ] Aspect ratio The aspect ratio of pictures taken on a digital camera (4:3) does not match the aspect ratio of your digital photo frame (16:9). When displaying pictures without any size adjustment (see page 16 ­ Preferences, Aspect Ratio) black bars will appear in the left and right picture margins. If you want to optimise the picture display on your photo frame it is necessary to crop the picture by using a suitable image-editing programme on your computer. Normally, this kind of programme is included in the package of most digital cameras. [. . . ]