User manual SILVERCREST CRE-521

[. . . ] English 1 Preliminary notes Thank you for selecting our MP3/WMA/OGG car radio SilverCrest CRE-521. In order for you to utilize this device and all its options, we recommend that you read the corresponding instructions in this manual before the initial use of the device, even if you’re familiar with handling electronic devices. Please pay particular attention to the chapter “Important safety instructions” on page 5. If you sell or transfer this device, please be sure to pass along these instructions as well. 2 Copyright The contents of this manual may not be reproduced, copied or otherwise duplicated in electronic, mechanical, magnetic, optical, chemical, manual, or any other form without the permission of our company, nor may they be stored in a search engine nor translated into another language. 3 Declaration The descriptions and features in the manual only serve as general information and do not represent a guarantee. [. . . ] Note: The “USB” program source can only be selected through the “MODE” button if a USB storage medium has been connected to the device. When you pull off the USB storage medium or the plug of the USB connection cable from the device, the device automatically switches back to the most recently selected program source. Please note that only those USB storage media are recognized that have been formatted and written according to the FAT16 or FAT32 standard. Hard drives formatted in NTFS or Linux are not recognized or supported. 15. 3 Selecting an iPod® as data source To select an iPod® as the data source, please connect it with the iPod® connection cable to the USB connection ® The audio data stored on the iPod can now be played in the same way as on the regular USB storage media. of the device. Note: Please note that the memory of an iPod® is differentiated into two different memory levels. The iTunes® level is not supported. 15. 4 Insert / remove SD/MMC To insert an SD/MMC card, please press the button on the device. Then the operating unit automatically flips down and uncovers the SD/MMC insertion slot. Now please insert your SD/MMC card into the card slot with the contacts to the left until it audibly snaps into position. Now please press the card that will be removed slightly into the device, until it snaps out. 28 English Note: Never use force when inserting an SD/MMC card; this could damage the device as well as the card. Also prevent direct skin contact with the contacts on the card to prevent contact problems . 15. 5 Selecting SD/MMC as a program source To play back audio tracks from an SD/MMC memory card, press the "MODE” button to select “M-CARD” as the data source. Then the device will read the music tracks that can be reproduced from the memory card and begins to play back the first track. Note: The program source “SD/MMC” can only be selected through the “MODE” button if there is an SD/MMC card in the card reader. When you remove the SD/MMC card from the device, the device automatically switches back to the most recently selected program source. 15. 6 MP3 functions Below are descriptions of the functions and displays when an MP3 CD is inserted, an MP3 player / USB storage device is connected, or when an SD/MMC memory card is inserted. When the MP3 data is read, the total amount of folders and tracks will briefly appear on the display. During the playback, the display will alternately show the folder name, track name, and the name of the artist. 15. 7 Searching for track numbers When searching for track numbers, you have the option of quickly getting to the desired track number. To start searching for track numbers, briefly press the “AS/PS” button. The message “001” will appear on the display, whereby the last digit is flashing. By turning the control dial you can select the last digit of the search entry and confirm it by pressing the control dial . You can also set this by turning the control dial and confirm by pressing. If you press the “BAND” button at the start of the search, the device selects the desired file and plays it back. If you don’t need the second and/or third digit for the search, just leave these settings unchanged and begin searching with the “Band” button . 29 Note: If a larger number is selected than there are tracks on the data storage medium, the device will start playing the last track on the data storage medium. 15. 8 Alphabetical search With an alphabetical search, you have the option of searching tracks on the storage medium according to name or parts of the name (letter entry) and thereby quickly getting the desired track. [. . . ] Now replace the old battery with a new one of the same type (CR 2025). Please pay attention to the polarity ("+ pole" to the top) when you insert the battery. Please only touch the battery on the edge, since there might be contact problems otherwise. Now slide the battery compartment with the new battery back into the case. [. . . ]