User manual SIGMA 70-300MM F4-5.6 DG OS
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SIGMA 70-300MM F4-5.6 DG OS. We hope that this SIGMA 70-300MM F4-5.6 DG OS user guide will be useful to you.
Manual abstract: user guide SIGMA 70-300MM F4-5.6 DG OS
Detailed instructions for use are in the User's Guide.
[. . . ] Depending on the combination with camera some restrictions with its functions may result. ATTACHING TO CAMERA BODY
When this lens is attached to the camera body it will automatically function in the same way as your normal lens. On the lens mount surface, there are a number of couplers and electrical contacts. To avoid damaging the lens, be especially sure to place the lens with its front end down while changing the lens. [. . . ] This is due to possible focus shift resulting from extreme changes in temperature which cause various components in the lens to expand and contact. Zooming Rotate the Rubber grip on the zoom ring to the desired position. Using the Optical Stabilizer function it is possible to get sharp results at shutter speeds approximately 4 stops slower than you could without using the OS function. Press the shutter button halfway down, confirm the image in the viewfinder is stable then take the picture. (It takes approximately 1 second to produce a stable image from the time of depressing the shutter button halfway). Do not use the Optical Stabilizer in the following situations: When the lens is mounted on a tripod. If you are not using OS, please turn OFF the OS switch, in order to prevent unnecessary battery consumption. Be sure to turn the OS switch to the OFF position before attaching or detaching the lens to the camera. The OS continues to operate after you release your finger from the shutter button, as long as the exposure meter displays the exposure value. Never remove the lens or remove the camera’s battery while the image stabilizer is operating as this could damage the lens. Although the viewfinder image may appear to shake immediately after shooting and/or at the start of the flash charge cycle of the camera’s built-in flash, it will not cause any effect to the pictures. For Sony and Pentax mounts, it is only possible to use the OS function, incorporated in this lens, with camera bodies which support motors driven by ultrasonic waves such as HSM. When using the OS function, please turn off the optical stabilizer function of the camera body and set the OS switch of the lens to ON. When using the camera’s optical stabilizer function, please set the OS switch of the lens to OFF and turn the camera’s optical stabilizer function on. This lens hood helps to prevent flare and ghosted images caused by bright illumination from outside the picture area. 3) When taking photographs using the built-in flash, it is advisable to remove the lens hood so as to avoid cutting off any of the flash output, which could cause a shadow in the picture. In order to place the lens and hood into the storage case, you must first remove the hood, then replace it on the lens in the reverse position. (
5)
F11
DEPTH OF FIELD SCALE
The depth of field scale helps you to check the depth of field (the zone of sharpness) of your composition. [. . . ] When entering a warm room from the cold outdoors, it is advisable to keep the lens in the case until the temperature of the lens approaches room temperature. For at undgå beskadigelse af objektivet, sørg da for at placere det med fronten nedad ved objektivskift. Vid objektivbyte, se till att objektivets front hålls nedåt för att undvika att objektivet skadas. Hvis Optical Stabilizer ikke anvendes bør OS omskifteren stilles på OFF for at spare på batteriet. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SIGMA 70-300MM F4-5.6 DG OS
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SIGMA 70-300MM F4-5.6 DG OS will begin.