Detailed instructions for use are in the User's Guide.
[. . . ] SINAMICS S
1PH7 Induction Motors for Machine Tools
Configuration Manual 04/2009
SINAMICS
s
Preface
1 Motor description ______________
SINAMICS S 1PH7 induction motors (Machine tools)
Configuration Manual
2 Configuration ______________ 3 ______________ 4 ______________ 5 Motor components (options) ______________ 6 Connection system ______________ 7 ______________ A Appendix ______________
Information for using the motors Technical data and characteristics Mechanical properties of the motors
(APH7W), 04/2009
6SN1197-0AD72-0BP0
Legal information Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are graded according to the degree of danger. DANGER indicates that death or severe personal injury will result if proper precautions are not taken. [. . . ] 400 V AC, Servo Control (ALM), 1PH7133-D PN [kW] 12 MN [Nm] 115 IN [A] 30 VN [V] 336 fN [Hz] 34. 8 n2 [rpm] 4695 nmax [rpm] 8000 Tth [min] 30 I [A] 13 Imax [A] 60
Briefly: For continuous operation (with 30 % nmax, 60 % 2/3 nmax, 10 % standstill) for a duty cycle duration of 10 min.
108
1PH7 induction motors (Machine tools) Configuration Manual, (APH7W), 04/2009, 6SN1197-0AD72-0BP0
Technical data and characteristics 4. 4 P/n and M/n characteristics
Table 4- 22 nN [rpm] 1000 SINAMICS, 3-ph. 400 V AC, Servo Control, (ALM), 1PH7133-D-0L PN [kW] 12 MN [Nm] 115 IN [A] 30 VN [V] 336 fN [Hz] 34. 8 n2 [rpm] 4695 nmax [rpm] 10000 Tth [min] 30 I [A] 13 Imax [A] 60
Briefly: For continuous operation (with 30 % nmax, 60 % 2/3 nmax, 10 % standstill) for a duty cycle duration of 10 min.
1PH7 induction motors (Machine tools) Configuration Manual, (APH7W), 04/2009, 6SN1197-0AD72-0BP0
109
Technical data and characteristics 4. 4 P/n and M/n characteristics
Table 4- 23 nN [rpm] 1500 SINAMICS, 3-ph. 400 V AC, Servo Control (ALM), 1PH7133-F PN [kW] 15 MN [Nm] 95 IN [A] 34 VN [V] 346 fN [Hz] 51. 3 n2 [rpm] 6854 nmax [rpm] 8000 Tth [min] 30 I [A] 14 Imax [A] 68
Briefly: For continuous operation (with 30 % nmax, 60 % 2/3 nmax, 10 % standstill) for a duty cycle duration of 10 min.
110
1PH7 induction motors (Machine tools) Configuration Manual, (APH7W), 04/2009, 6SN1197-0AD72-0BP0
Technical data and characteristics 4. 4 P/n and M/n characteristics
Table 4- 24 nN [rpm] 1000 SINAMICS, 3-ph. 400 V AC, Servo Control, (ALM), 1PH7133-F-0L PN [kW] 15 MN [Nm] 95 IN [A] 34 VN [V] 346 fN [Hz] 51. 3 n2 [rpm] 6000 nmax [rpm] 10000 Tth [min] 30 I [A] 14 Imax [A] 68
Briefly: For continuous operation (with 30 % nmax, 60 % 2/3 nmax, 10 % standstill) for a duty cycle duration of 10 min.
1PH7 induction motors (Machine tools) Configuration Manual, (APH7W), 04/2009, 6SN1197-0AD72-0BP0
111
Technical data and characteristics 4. 4 P/n and M/n characteristics
Table 4- 25 nN [rpm] 2000 SINAMICS, 3-ph. 400 V AC, Servo Control (ALM), 1PH7133-G PN [kW] 20 MN [Nm] 95 IN [A] 45 VN [V] 350 fN [Hz] 68. 0 n2 [rpm] 6500 nmax [rpm] 8000 Tth [min] 30 I [A] 18 Imax [A] 90
Briefly: For continuous operation (with 30 % nmax, 60 % 2/3 nmax, 10 % standstill) for a duty cycle duration of 10 min.
112
1PH7 induction motors (Machine tools) Configuration Manual, (APH7W), 04/2009, 6SN1197-0AD72-0BP0
Technical data and characteristics 4. 4 P/n and M/n characteristics
Table 4- 26 nN [rpm] 2000 SINAMICS, 3-ph. 400 V AC, Servo Control (ALM), 1PH7133-G-0L PN [kW] 20 MN [Nm] 95 IN [A] 45 VN [V] 350 fN [Hz] 68. 0 n2 [rpm] 6000 nmax [rpm] 10000 Tth [min] 30 I [A] 18 Imax [A] 90
Briefly: For continuous operation (with 30 % nmax, 60 % 2/3 nmax, 10 % standstill) for a duty cycle duration of 10 min.
1PH7 induction motors (Machine tools) Configuration Manual, (APH7W), 04/2009, 6SN1197-0AD72-0BP0
113
Technical data and characteristics 4. 4 P/n and M/n characteristics
Table 4- 27 nN [rpm] 1500 SINAMICS, 3-ph. 400 V AC, Servo Control (ALM), 1PH7135-F PN [kW] 18. 5 MN [Nm] 118 IN [A] 42 VN [V] 350 fN [Hz] 51. 1 n2 [rpm] 7537 nmax [rpm] 8000 Tth [min] 30 I [A] 17 Imax [A] 84
Briefly: For continuous operation (with 30 % nmax, 60 % 2/3 nmax, 10 % standstill) for a duty cycle duration of 10 min.
114
1PH7 induction motors (Machine tools) Configuration Manual, (APH7W), 04/2009, 6SN1197-0AD72-0BP0
Technical data and characteristics 4. 4 P/n and M/n characteristics
Table 4- 28 nN [rpm] 1500 SINAMICS, 3-ph. 400 V AC, Servo Control, (ALM), 1PH7135-F-0L PN [kW] 18. 5 MN [Nm] 118 IN [A] 42 VN [V] 350 fN [Hz] 51. 1 n2 [rpm] 7537 nmax [rpm] 10000 Tth [min] 30 I [A] 17 Imax [A] 84
Briefly: For continuous operation (with 30 % nmax, 60 % 2/3 nmax, 10 % standstill) for a duty cycle duration of 10 min.
1PH7 induction motors (Machine tools) Configuration Manual, (APH7W), 04/2009, 6SN1197-0AD72-0BP0
115
Technical data and characteristics 4. 4 P/n and M/n characteristics
Table 4- 29 nN [rpm] 1000 SINAMICS, 3-ph. 400 V AC, Servo Control (ALM), 1PH7137-D PN [kW] 17 MN [Nm] 162 IN [A] 43 VN [V] 322 fN [Hz] 34. 6 n2 [rpm] 5403 nmax [rpm] 8000 Tth [min] 30 I [A] 19 Imax [A] 86
Briefly: For continuous operation (with 30 % nmax, 60 % 2/3 nmax, 10 % standstill) for a duty cycle duration of 10 min.
116
1PH7 induction motors (Machine tools) Configuration Manual, (APH7W), 04/2009, 6SN1197-0AD72-0BP0
Technical data and characteristics 4. 4 P/n and M/n characteristics
Table 4- 30 nN [rpm] 1000 SINAMICS, 3-ph. 400 V AC, Servo Control, (ALM), 1PH7137-D-0L PN [kW] 17 MN [Nm] 162 IN [A] 43 VN [V] 322 fN [Hz] 34. 6 n2 [rpm] 5403 nmax [rpm] 10000 Tth [min] 30 I [A] 19 Imax [A] 86
Briefly: For continuous operation (with 30 % nmax, 60 % 2/3 nmax, 10 % standstill) for a duty cycle duration of 10 min.
1PH7 induction motors (Machine tools) Configuration Manual, (APH7W), 04/2009, 6SN1197-0AD72-0BP0
117
Technical data and characteristics 4. 4 P/n and M/n characteristics
Table 4- 31 nN [rpm] 1500 SINAMICS, 3-ph. 400 V AC, Servo Control (ALM), 1PH7137-F PN [kW] 22 MN [Nm] 140 IN [A] 57 VN [V] 308 fN [Hz] 51. 2 n2 [rpm] 7000 nmax [rpm] 8000 Tth [min] 30 I [A] 22. 8 Imax [A] 112
Briefly: For continuous operation (with 30 % nmax, 60 % 2/3 nmax, 10 % standstill) for a duty cycle duration of 10 min.
118
1PH7 induction motors (Machine tools) Configuration Manual, (APH7W), 04/2009, 6SN1197-0AD72-0BP0
Technical data and characteristics 4. 4 P/n and M/n characteristics
Table 4- 32 nN [rpm] 1500 SINAMICS, 3-ph. 400 V AC, Servo Control, (ALM), 1PH7137-F-0L PN [kW] 22 MN [Nm] 140 IN [A] 57 VN [V] 308 fN [Hz] 51. 2 n2 [rpm] 6500 nmax [rpm] 10000 Tth [min] 30 I [A] 22. 8 Imax [A] 112
Briefly: For continuous operation (with 30 % nmax, 60 % 2/3 nmax, 10 % standstill) for a duty cycle duration of 10 min.
1PH7 induction motors (Machine tools) Configuration Manual, (APH7W), 04/2009, 6SN1197-0AD72-0BP0
119
Technical data and characteristics 4. 4 P/n and M/n characteristics
Table 4- 33 nN [rpm] 2000 SINAMICS, 3-ph. 400 V AC, Servo Control (ALM), 1PH7137-G PN [kW] 28 MN [Nm] 134 IN [A] 60 VN [V] 350 fN [Hz] 68. 0 n2 [rpm] 6000 nmax [rpm] 8000 Tth [min] 30 I [A] 21 Imax [A] 120
Briefly: For continuous operation (with 30 % nmax, 60 % 2/3 nmax, 10 % standstill) for a duty cycle duration of 10 min.
120
1PH7 induction motors (Machine tools) Configuration Manual, (APH7W), 04/2009, 6SN1197-0AD72-0BP0
Technical data and characteristics 4. 4 P/n and M/n characteristics
Table 4- 34 nN [rpm] 2000 SINAMICS, 3-ph. 400 V AC, Servo Control (ALM), 1PH7137-G-0L PN [kW] 28 MN [Nm] 134 IN [A] 60 VN [V] 350 fN [Hz] 68. 0 n2 [rpm] 5000 nmax [rpm] 10000 Tth [min] 30 I [A] 21 Imax [A] 120
Briefly: For continuous operation (with 30 % nmax, 60 % 2/3 nmax, 10 % standstill) for a duty cycle duration of 10 min.
1PH7 induction motors (Machine tools) Configuration Manual, (APH7W), 04/2009, 6SN1197-0AD72-0BP0
121
Technical data and characteristics 4. 4 P/n and M/n characteristics
Table 4- 35 nN [rpm] 400 SINAMICS, 3-ph. 400 V AC, Servo Control (ALM), 1PH7163-B PN [kW] 9. 5 MN [Nm] 227 IN [A] 30 VN [V] 274 fN [Hz] 14. 3 n2 [rpm] 1943 nmax [rpm] 6500 Tth [min] 35 I [A] 11. 5 Imax [A] 51
Briefly: For continuous operation (with 30 % nmax, 60 % 2/3 nmax, 10 % standstill) for a duty cycle duration of 10 min.
122
1PH7 induction motors (Machine tools) Configuration Manual, (APH7W), 04/2009, 6SN1197-0AD72-0BP0
Technical data and characteristics 4. 4 P/n and M/n characteristics
Table 4- 36 nN [rpm] 500 SINAMICS, 3-ph. 400 V AC, Servo Control (ALM), 1PH7163-B-0L PN [kW] 12 MN [Nm] 229 IN [A] 30 VN [V] 340 fN [Hz] 17. 6 n2 [rpm] 2487 nmax [rpm] 8000 Tth [min] 35 I [A] 11. 5 Imax [A] 54
Briefly: For continuous operation (with 30 % nmax, 60 % 2/3 nmax, 10 % standstill) for a duty cycle duration of 10 min.
1PH7 induction motors (Machine tools) Configuration Manual, (APH7W), 04/2009, 6SN1197-0AD72-0BP0
123
Technical data and characteristics 4. 4 P/n and M/n characteristics
Table 4- 37 nN [rpm] 1000 SINAMICS, 3-ph. 400 V AC, Servo Control (ALM), 1PH7163-D PN [kW] 22 MN [Nm] 210 IN [A] 55 VN [V] 315 fN [Hz] 34. 2 n2 [rpm] 5871 nmax [rpm] 6500 Tth [min] 35 I [A] 24. 0 Imax [A] 110
Briefly: For continuous operation (with 30 % nmax, 60 % 2/3 nmax, 10 % standstill) for a duty cycle duration of 10 min.
124
1PH7 induction motors (Machine tools) Configuration Manual, (APH7W), 04/2009, 6SN1197-0AD72-0BP0
Technical data and characteristics 4. 4 P/n and M/n characteristics
Table 4- 38 nN [rpm] 1000 SINAMICS, 3-ph. 400 V AC, Servo Control, (ALM), 1PH7163-D-0L PN [kW] 22 MN [Nm] 210 IN [A] 55 VN [V] 315 fN [Hz] 32. 2 n2 [rpm] 4000 nmax [rpm] 8000 Tth [min] 35 I [A] 24 Imax [A] 110
Briefly: For continuous operation (with 30 % nmax, 60 % 2/3 nmax, 10 % standstill) for a duty cycle duration of 10 min.
1PH7 induction motors (Machine tools) Configuration Manual, (APH7W), 04/2009, 6SN1197-0AD72-0BP0
125
Technical data and characteristics 4. 4 P/n and M/n characteristics
Table 4- 39 nN [rpm] 1500 SINAMICS, 3-ph. 400 V AC, Servo Control (ALM), 1PH7163-F PN [kW] 30. 0 MN [Nm] 191 IN [A] 72 VN [V] 319 fN [Hz] 50. 9 n2 [rpm] 5500 nmax [rpm] 6500 Tth [min] 35 I [A] 30 Imax [A] 144
Briefly: For continuous operation (with 30 % nmax, 60 % 2/3 nmax, 10 % standstill) for a duty cycle duration of 10 min.
126
1PH7 induction motors (Machine tools) Configuration Manual, (APH7W), 04/2009, 6SN1197-0AD72-0BP0
Technical data and characteristics 4. 4 P/n and M/n characteristics
Table 4- 40 nN [rpm] 1500 SINAMICS, 3-ph. 400 V AC, Servo Control, (ALM), 1PH7163-F-0L PN [kW] 30 MN [Nm] 191 IN [A] 72 VN [V] 319 fN [Hz] 50. 9 n2 [rpm] 5000 nmax [rpm] 8000 Tth [min] 35 I [A] 30 Imax [A] 144
Briefly: For continuous operation (with 30 % nmax, 60 % 2/3 nmax, 10 % standstill) for a duty cycle duration of 10 min.
1PH7 induction motors (Machine tools) Configuration Manual, (APH7W), 04/2009, 6SN1197-0AD72-0BP0
127
Technical data and characteristics 4. 4 P/n and M/n characteristics
Table 4- 41 nN [rpm] 2000 SINAMICS, 3-ph. 400 V AC, Servo Control (ALM), 1PH7163-G PN [kW] 36 MN [Nm] 172 IN [A] 85 VN [V] 333 fN [Hz] 67. 5 n2 [rpm] 3500 nmax [rpm] 6500 Tth [min] 35 I [A] 37 Imax [A] 170
Briefly: For continuous operation (with 30 % nmax, 60 % 2/3 nmax, 10 % standstill) for a duty cycle duration of 10 min.
128
1PH7 induction motors (Machine tools) Configuration Manual, (APH7W), 04/2009, 6SN1197-0AD72-0BP0
Technical data and characteristics 4. 4 P/n and M/n characteristics
Table 4- 42 nN [rpm] 2000 SINAMICS, 3-ph. 400 V AC, Servo Control (ALM), 1PH7163-G-0L PN [kW] 36 MN [Nm] 172 IN [A] 85 VN [V] 333 fN [Hz] 67. 5 n2 [rpm] 3500 nmax [rpm] 8000 Tth [min] 35 I [A] 37 Imax [A] 170
Briefly: For continuous operation (with 30 % nmax, 60 % 2/3 nmax, 10 % standstill) for a duty cycle duration of 10 min.
1PH7 induction motors (Machine tools) Configuration Manual, (APH7W), 04/2009, 6SN1197-0AD72-0BP0
129
Technical data and characteristics 4. 4 P/n and M/n characteristics
Table 4- 43 nN [rpm] 500 SINAMICS, 3-ph. [. . . ] Essential influencing factors include: Motor speed and associated operating time Pulse frequency of the frequency converter Grounding relationships between the motor and the connected load
Application for option L27
At speeds < 500 rpm, the load due to bearing currents increases significantly. Option L27 is always required if the motor is operated in the speed range between 0 . . . 500 rpm may be a maximum of 800 h (for an assumed bearing change interval (tLW) of the bearings of 20, 000 h.
Table 7- 8 Measures that are required for operation in the speed range < 500 rpm Bearing change interval (tLW) for lifetime lubrication [h] 1) Options that are required 20000 L27 _ Remarks Due to the experience from the field (in practice) no dangers have been identified due to bearing currents Insulated NDE bearings Generally insulated NDE bearings
Shaft height
100 - 160
180 225 1)
Definition, refer to the table "Recommended bearing change intervals (standard bearing design)"
1PH7 induction motors (Machine tools) Configuration Manual, (APH7W), 04/2009, 6SN1197-0AD72-0BP0
233
Information for using the motors 7. 11 Insulated bearings (NDE) (option L27)
Motor grounding
In order to avoid rotor ground currents, the motor frame should be well grounded - e. g. The motor cable shield should be connected at both ends through the largest possible surface area. [. . . ]